TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 31+38L BMW F800GS/F700GS/F650GS(Twin)/シルバーフレーム

価格188579円

●メーカー品番:01-048-6031-0●適合車種:BMW・F650GS(Twin)/F700GS/F800GS●備考:The next step in evolutionAfter Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro,its excellent properties have all been retained, but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use ? you could say it’s “Plug and play” for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click ? and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches, in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame- Stainless steel rack- sturdy connecting bar- overall width: 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 31+38L BMW F800GS/F700GS/F650GS(Twin)/シルバーフレーム

価格188579円

●メーカー品番:01-048-6031-0●適合車種:BMW・F650GS(Twin)/F700GS/F800GS●備考:The next step in evolutionAfter Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro,its excellent properties have all been retained, but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use ? you could say it’s “Plug and play” for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click ? and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches, in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame- Stainless steel rack- sturdy connecting bar- overall width: 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 31+38L BMW F800GS/F700GS/F650GS(Twin)/ブラックフレーム

価格180830円

●メーカー品番:01-048-6081-0●適合車種:BMW・F650GS(Twin)/F700GS/F800GS●備考:The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro,its excellent properties have all been retained, but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism.The lid can stay closed when it is removed from the bike. Pannier on, click - and go!The innovative construction in resilient stainless steel releases the catch before attachment, which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look,but also prevents rubbing inside the case. The ultra thick,high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches, in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions.The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width: 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity.Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 31+31L BMW F650GS/Dakar/G650GS/G650GS Sertao(シルバーフレーム)

価格177904円

●メーカー品番:01-300-6001-0●適合車種:BMW・G650GS Sertao/F650GS/Dakar●備考:The next step in evolutionAfter Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro,its excellent properties have all been retained, but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism.The lid can stay closed when it is removed from the bike. Pannier on, click - and go!The innovative construction in resilient stainless steel releases the catch before attachment, which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches, in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions.The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame- Stainless steel rack- sturdy connecting bar- overall width: 99 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit.Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:2 x aluminium pannier Zega Pro2 And-S 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31+31L BMW F650GS/Dakar/G650GS/Sertao(シルバーフレーム)

価格175406円

●メーカー品番:01-300-5701-0●適合車種:BMW・G650GS Sertao/F650GS/Dakar●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.Pillion comfort not restricted in any way.Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 94 cm- stainless steel rack Pannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro*And-S* 31 litres 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31+31L BMW F650GS/Dakar/G650GS/Sertao(シルバーフレーム)

価格175406円

●メーカー品番:01-300-5701-0●適合車種:BMW・G650GS Sertao/F650GS/Dakar●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.Pillion comfort not restricted in any way.Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 94 cm- stainless steel rack Pannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro*And-S* 31 litres 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 31+38L BMW F800GS/F700GS/F650GS(Twin)/シルバーフレーム

価格194779円

●メーカー品番:01-048-6032-0●適合車種:BMW・F650GS(Twin)/F700GS/F800GS●備考:The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2. Based on the Zega Pro,its excellent properties have all been retained, but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use ? you could say it’s “Plug and play” for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click ? and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches, in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame- Stainless steel rack- sturdy connecting bar- overall width: 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:1 x aluminium pannier Zega Pro2 And-Black 31 litres 1 x aluminium pannier Zega Pro2 And-Black 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

【BMW F650GS [シングル]】 SARGENT EUレギュラーワールドスポーツパフォーマンスプラスシート カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー

価格61560円

■商品番号WS-602-SE■商品概要パイピング:カスタム【素材】シート表皮:デュラテックスリム表皮:レザールックカラー:E-111/シルバー■適合車種▼BMWF650GS F700GS F800GS ■詳細説明長時間の利用にも臀部が痛くならない低反発素材を内部に使用。また、使用するにつれ、形状がお客様の臀部にフィットするようになっています。商品は手作りの受注生産品です。■注意点※手作り生産の為、完全受注生産品となります。本国(米国)への発注のため、納期には1-2ヶ月ほどお時間を頂きます。予めご了承ください。※純正シートを送って頂く必要はございません。※取扱い説明書はすべて英語・その他外国語です。あらかじめご了承ください。

詳細を確認する

【BMW F650GS】 SARGENT EUレギュラーワールドスポーツパフォーマンスプラスシート カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー

価格61560円

■商品番号WS-602-SE■商品概要パイピング:カスタム【素材】シート表皮:デュラテックスリム表皮:レザールックカラー:E-111/シルバー■適合車種▼BMWF650GS F700GS F800GS ■詳細説明長時間の利用にも臀部が痛くならない低反発素材を内部に使用。また、使用するにつれ、形状がお客様の臀部にフィットするようになっています。商品は手作りの受注生産品です。■注意点※手作り生産の為、完全受注生産品となります。本国(米国)への発注のため、納期には1-2ヶ月ほどお時間を頂きます。予めご了承ください。※純正シートを送って頂く必要はございません。※取扱い説明書はすべて英語・その他外国語です。あらかじめご了承ください。

詳細を確認する

【BMW F650GS Dakar [ダカール]】 SARGENT EUレギュラーワールドスポーツパフォーマンスプラスシート カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー カラー:E-111/シルバー

価格61560円

■商品番号WS-602-SE■商品概要パイピング:カスタム【素材】シート表皮:デュラテックスリム表皮:レザールックカラー:E-111/シルバー■適合車種▼BMWF650GS F700GS F800GS ■詳細説明長時間の利用にも臀部が痛くならない低反発素材を内部に使用。また、使用するにつれ、形状がお客様の臀部にフィットするようになっています。商品は手作りの受注生産品です。■注意点※手作り生産の為、完全受注生産品となります。本国(米国)への発注のため、納期には1-2ヶ月ほどお時間を頂きます。予めご了承ください。※純正シートを送って頂く必要はございません。※取扱い説明書はすべて英語・その他外国語です。あらかじめご了承ください。

詳細を確認する

ページ:TOP / 1 /2 /3 /4 /5 /6 /