TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/ブラックフレーム

価格165332円

●メーカー品番：01-048-6080-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard，lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium，anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look，but also prevents rubbing inside the case． The ultra thick，high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity．Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres1 x aluminium pannier Zega Pro2 38 litres1 x pannier rack including mounting hardware1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 31＋31L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格184103円

●メーカー品番：01-300-6002-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 99 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-Black 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 31＋31L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格184103円

●メーカー品番：01-300-6002-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 99 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-Black 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/シルバーフレーム

価格173168円

●メーカー品番：01-048-6030-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres 1 x aluminium pannier Zega Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/シルバーフレーム

価格173168円

●メーカー品番：01-048-6030-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres 1 x aluminium pannier Zega Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 38＋38L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格177904円

●メーカー品番：01-300-6011-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 107 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/ブラックフレーム

価格187116円

●メーカー品番：01-048-6082-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier ZEGA Pro2 31 litres 1 x aluminium pannier ZEGA Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 38＋38L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格184103円

●メーカー品番：01-300-6012-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 107 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-Black 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックダカール（Dakar） リアシートバッグ BMW F800GS； F800GS ADV； F700GS； F650GS（Twin）

価格32338円

●メーカー品番：01-048-5818-0●適合車種：BMW F800GS／F800GS ADV／F700GS／F650GS（Twin）●備考：Our strictly limited bags and tank rucksacks in Dakar？ design attract undivided attention simply through their authentic color scheme. The large Dakar emblem and the matching color of the embroidered logo are further major differences to the proven models in our portfolio with the same construction. - Insert panels made from strong waterproof tarpaulin - The material that we use is not plain nylon - it is certified Cordura fabric， made in Germany， as also used for protective motorcycle clothing and expedition equipment - Sturdy body and top made from high-quality， water-resistant and abrasion-resistant 1100 dtex Cordura - Outer pockets and inserts made from 560 dtex Cordura - Waterproof coating on inside of fabric - Fluorocarbon impregnation and Teflon coating by DuPont using nanotechnology for protection against moisture， dirt， oil and fading - Washable and easy to clean - The fabric used has been tested for harmful substances and certified in accordance with OEKO-TEX Standard 100 - Reflective 3M Scotchlite panels for maximum visibility - Strong， ergonomic carry handle for practical transportation away from the bike - All-round zip for easy expansion - Made for extreme loads and built to last - Perfect fit - Securely attached but can be quickly taken off the bike - Simply zips onto attachment kit with two sturdy， large-tooth， dirt-resistant zips - Velcro strip in the middle of the base plate holds the bag securely - Carry straps for use as a shoulder bag or rucksack are included - Low-weight bag with high carrying capacity and large usable volume - Water-resistant， high-quality zips - Reflective quick-release elastic straps for quickly stowing gloves or a rain jacket - Waterproof inner bags available separately - Optional rain cover available - Flat outer pockets for easy access to the small items you need in a hurry - Large main compartment without extra subdivisions provides maximum space for individual loading - Water-resistant cable grommet for a charging cable or other power supply - Appealing， exclusive blend of materials with a refreshing design - All luggage systems are carefully hand-crafted in Germany - Soft， slip-resistant base plate ensures secure positioning and prevents paint damage - To ensure volume measurements are fair and accurate， they are taken in use with the bag fitted to the bike - they are not the result of estimates or rough calculations as is often the case. What’s included： Please note： Use paint protection film if necessary！ Size： （L x W x H） approx. 33 x 30 x 20／32 cm Volume： approx. 17／22 litres●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 45＋45L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格179710円

●メーカー品番：01-300-6021-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 115 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-S 45 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 38＋38L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格184103円

●メーカー品番：01-300-6012-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 107 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-Black 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/ブラックフレーム

価格187116円

●メーカー品番：01-048-6082-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier ZEGA Pro2 31 litres 1 x aluminium pannier ZEGA Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 31＋31L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格177904円

●メーカー品番：01-300-6001-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 99 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-S 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

DAYTONA GIVI BF15 イージーロック BMW F650GS/F750GS/F800GS('08-'13) 品番79123 デイトナ

価格6318円

掲載商品はお取り寄せとなる場合があります。受注完了後に納期等をご連絡致します。■タンクロックシリーズの取り付けに必要になります■メーカー：DAYTONA/デイトナ■モデル名：DAYTONA GIVI BF15 イージーロック BMW F650GS/F750GS/F800GS('08-'13) 品番79123 デイトナ■適合車種例：BMW F650GS/F750GS/F800GS('08-'13)※適合車種はメーカーサイトで確認してください。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 45＋45L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格179710円

●メーカー品番：01-300-6021-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 115 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-S 45 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックダカール（Dakar） リアシートバッグ BMW F800GS； F800GS ADV； F700GS； F650GS（Twin）

価格32338円

●メーカー品番：01-048-5818-0●適合車種：BMW F800GS／F800GS ADV／F700GS／F650GS（Twin）●備考：Our strictly limited bags and tank rucksacks in Dakar？ design attract undivided attention simply through their authentic color scheme. The large Dakar emblem and the matching color of the embroidered logo are further major differences to the proven models in our portfolio with the same construction. - Insert panels made from strong waterproof tarpaulin - The material that we use is not plain nylon - it is certified Cordura fabric， made in Germany， as also used for protective motorcycle clothing and expedition equipment - Sturdy body and top made from high-quality， water-resistant and abrasion-resistant 1100 dtex Cordura - Outer pockets and inserts made from 560 dtex Cordura - Waterproof coating on inside of fabric - Fluorocarbon impregnation and Teflon coating by DuPont using nanotechnology for protection against moisture， dirt， oil and fading - Washable and easy to clean - The fabric used has been tested for harmful substances and certified in accordance with OEKO-TEX Standard 100 - Reflective 3M Scotchlite panels for maximum visibility - Strong， ergonomic carry handle for practical transportation away from the bike - All-round zip for easy expansion - Made for extreme loads and built to last - Perfect fit - Securely attached but can be quickly taken off the bike - Simply zips onto attachment kit with two sturdy， large-tooth， dirt-resistant zips - Velcro strip in the middle of the base plate holds the bag securely - Carry straps for use as a shoulder bag or rucksack are included - Low-weight bag with high carrying capacity and large usable volume - Water-resistant， high-quality zips - Reflective quick-release elastic straps for quickly stowing gloves or a rain jacket - Waterproof inner bags available separately - Optional rain cover available - Flat outer pockets for easy access to the small items you need in a hurry - Large main compartment without extra subdivisions provides maximum space for individual loading - Water-resistant cable grommet for a charging cable or other power supply - Appealing， exclusive blend of materials with a refreshing design - All luggage systems are carefully hand-crafted in Germany - Soft， slip-resistant base plate ensures secure positioning and prevents paint damage - To ensure volume measurements are fair and accurate， they are taken in use with the bag fitted to the bike - they are not the result of estimates or rough calculations as is often the case. What’s included： Please note： Use paint protection film if necessary！ Size： （L x W x H） approx. 33 x 30 x 20／32 cm Volume： approx. 17／22 litres●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックタンクバッグ 「Exp リミテッド・レッド」 BMW F800GS/F800GS ADV/F700GS/F650GS （Twin）

価格32080円

●メーカー品番：01-048-5827-0●適合車種：BMW F800GS/F800GS ADV/F700GS/F650GS （Twin）●カラー：レッド●備考：It fits like a made-to-measure suit！As we develop and offer the exclusive base plates and strong attachment kits for our robust tank bags for each specific vehicle，it is a given that a perfect fit with no play at all should be achieved！The modell Exp Sport is also notable for the expansion option with an all-round zipper； small items can easily be stored under the adjustable elastic strap on the back，and there’s a zip-up pocket.Thanks to the water-repellent cable hole， it’s now easy to charge a mobile phone in the tank bag -plus the side pockets have an expansion pleat，which means there’s even more room inside them than you would think.You’ll be extremely impressed by the long list of special features.- Vehicle-specific， precisely fitting base plate for secure， play-free attachment to the bike - Insert panels made from strong waterproof tarpaulin - The material that we use is not plain nylon - it is certified Cordura fabric， made in Germany， as also used for protective motorcycle clothing and expedition equipment - Sturdy body and top made from high-quality， water-resistant and abrasion-resistant 1100 dtex Cordura - Outer pockets and inserts made from 560 dtex Cordura - Waterproof coating on inside of fabric - Fluorocarbon impregnation and Teflon coating by DuPont using nanotechnology for protection against moisture， dirt， oil and fading - Washable and easy to clean - The fabric used has been tested for harmful substances and certified in accordance with OEKO-TEX Standard 100 - Reflective 3M Scotchlite panels for maximum visibility - Strong， carry handle for practical transportation away from the bike - All-round zip for easy expansion - Made for extreme loads and built to last - Perfect fit - Inner pocket in top cover for maps， documents etc. - Organiser with small inner pocket inside the top cover for toll cards， credit cards and loops for pens or a small torch - Quick-release plastic buckles on the front - Large， strong and secure Velcro fastener on the back - Securely attached but can be quickly taken off the bike - Can be removed in seconds for refuelling - Map pocket with Velcro fastener and large opening included - Carry straps for use as a shoulder bag or rucksack are included - Low-weight bag with high carrying capacity and large usable volume - Foamed base plate with non-slip， rubber-coated underside and seamless neoprene inside - Water-resistant， high-quality zips - Reflective quick-release elastic straps for quickly stowing gloves or a rain jacket - Waterproof inner bags available separately - Optional rain cover available - Water-repellent insert for camera equipment available - Rain cover supplied - The special design of the side pockets means no additional 「horn guards」 are needed - Practical， spacious side pockets with generous expansion flap - Large main compartment without extra subdivisions provides maximum space for individual loading - Water-resistant cable grommet for a charging cable or other power supply - Unobstructed view of instruments and fitted navigation devices - Appealing， exclusive blend of materials with a refreshing design- All luggage systems are carefully hand-crafted in Germany - No troublesome improvisation with poorly fitting 「universal」 attachment kits - these luggage systems are developed specifically for each motorbike and we test the mountings as well as the - To ensure volume measurements are fair and accurate， they are taken in use with the bag fitted to the bike - they are not the result of estimates or rough calculations as is often the case.Please note： Use paint protection film if necessary！ (Item number 01-101-0100-0) Size： (L x W x H) approx. ca. 30 x 30 x 16/28 cm Volume： approx. 12 / 18 litres Colour： red●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/ブラックフレーム

価格180830円

●メーカー品番：01-048-6081-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolution After Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look，but also prevents rubbing inside the case． The ultra thick，high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity．Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 45＋45L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格184103円

●メーカー品番：01-300-6022-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 115 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-Black 45 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/ブラックフレーム

価格165332円

●メーカー品番：01-048-6080-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard，lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium，anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look，but also prevents rubbing inside the case． The ultra thick，high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity．Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres1 x aluminium pannier Zega Pro2 38 litres1 x pannier rack including mounting hardware1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/シルバーフレーム

価格194779円

●メーカー品番：01-048-6032-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolution After Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-Black 31 litres 1 x aluminium pannier Zega Pro2 And-Black 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックタンクバッグ 「Exp リミテッド・レッド」 BMW F800GS/F800GS ADV/F700GS/F650GS （Twin）

価格32080円

●メーカー品番：01-048-5827-0●適合車種：BMW F800GS/F800GS ADV/F700GS/F650GS （Twin）●カラー：レッド●備考：It fits like a made-to-measure suit！As we develop and offer the exclusive base plates and strong attachment kits for our robust tank bags for each specific vehicle，it is a given that a perfect fit with no play at all should be achieved！The modell Exp Sport is also notable for the expansion option with an all-round zipper； small items can easily be stored under the adjustable elastic strap on the back，and there’s a zip-up pocket.Thanks to the water-repellent cable hole， it’s now easy to charge a mobile phone in the tank bag -plus the side pockets have an expansion pleat，which means there’s even more room inside them than you would think.You’ll be extremely impressed by the long list of special features.- Vehicle-specific， precisely fitting base plate for secure， play-free attachment to the bike - Insert panels made from strong waterproof tarpaulin - The material that we use is not plain nylon - it is certified Cordura fabric， made in Germany， as also used for protective motorcycle clothing and expedition equipment - Sturdy body and top made from high-quality， water-resistant and abrasion-resistant 1100 dtex Cordura - Outer pockets and inserts made from 560 dtex Cordura - Waterproof coating on inside of fabric - Fluorocarbon impregnation and Teflon coating by DuPont using nanotechnology for protection against moisture， dirt， oil and fading - Washable and easy to clean - The fabric used has been tested for harmful substances and certified in accordance with OEKO-TEX Standard 100 - Reflective 3M Scotchlite panels for maximum visibility - Strong， carry handle for practical transportation away from the bike - All-round zip for easy expansion - Made for extreme loads and built to last - Perfect fit - Inner pocket in top cover for maps， documents etc. - Organiser with small inner pocket inside the top cover for toll cards， credit cards and loops for pens or a small torch - Quick-release plastic buckles on the front - Large， strong and secure Velcro fastener on the back - Securely attached but can be quickly taken off the bike - Can be removed in seconds for refuelling - Map pocket with Velcro fastener and large opening included - Carry straps for use as a shoulder bag or rucksack are included - Low-weight bag with high carrying capacity and large usable volume - Foamed base plate with non-slip， rubber-coated underside and seamless neoprene inside - Water-resistant， high-quality zips - Reflective quick-release elastic straps for quickly stowing gloves or a rain jacket - Waterproof inner bags available separately - Optional rain cover available - Water-repellent insert for camera equipment available - Rain cover supplied - The special design of the side pockets means no additional 「horn guards」 are needed - Practical， spacious side pockets with generous expansion flap - Large main compartment without extra subdivisions provides maximum space for individual loading - Water-resistant cable grommet for a charging cable or other power supply - Unobstructed view of instruments and fitted navigation devices - Appealing， exclusive blend of materials with a refreshing design- All luggage systems are carefully hand-crafted in Germany - No troublesome improvisation with poorly fitting 「universal」 attachment kits - these luggage systems are developed specifically for each motorbike and we test the mountings as well as the - To ensure volume measurements are fair and accurate， they are taken in use with the bag fitted to the bike - they are not the result of estimates or rough calculations as is often the case.Please note： Use paint protection film if necessary！ (Item number 01-101-0100-0) Size： (L x W x H) approx. ca. 30 x 30 x 16/28 cm Volume： approx. 12 / 18 litres Colour： red●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

2輪 デイトナ GIVI イージーロック BF15 品番：79123 JAN：4909449435595 BMW F650GS/F700GS/F800GS 2008年〜2013年

価格7020円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 DAYTONA ジビ タンクロック ツーリング ビーエムダブリュー でいとな※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際にタンクバッグとハンドルが接触する場合があります。※構造上、タンクバッグの高さが磁石式の物等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 デイトナ GIVI イージーロック BF15 品番：79123 JAN：4909449435595 BMW F650GS/F700GS/F800GS 2008年〜2013年

価格7020円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 DAYTONA ジビ タンクロック ツーリング ビーエムダブリュー でいとな※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際にタンクバッグとハンドルが接触する場合があります。※構造上、タンクバッグの高さが磁石式の物等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

【送料無料】[ジビ] イージーロック タンクバック取付アタッチメント BF15 / 79123 / [BMW]F650GS/F700GS/F800GS（'08?'13）

価格7020円

●適合車種[BMW]F650GS/F700GS/F800GS（'08?'13）●用途GIVI タンクロック取付用●適合車種[BMW]F650GS/F700GS/F800GS（'08〜'13）,F800GS Adventure('13〜'14)●注この商品だけでの取り付けはできません。別売のタンクロックシリーズと組み合わせてご使用ください。●注2車種によってはタンクキャップが全開しない場合が御座いますが、使用上問題なく給油することができます。●注3ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックすることはできます。●メーカー名GIVI/ジビ●メーカーコード79123●JANコード4909449435595GIVI タンクロックシステム専用 車種別アタッチメントタンクロックシリーズの取り付けに必要になります。欠品・廃盤の場合はメールにてご案内させていただきます。バイクトップ:ツーリング用品:ツーリングバッグ:ガソリンタンクに取付けるタンクバッグ:ジビ/GIVIイージーロック/タンクバッグ用アタッチメント/タンクロックシステム専用車種別アタッチメント/簡単取付/タンクロックシリーズ/便利/荷物/タンクに置く/目が届きやすい/タンクシート/タンクバッグ/バイク

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-black」アルミニウムパニアシステム 45＋45L BMW F650GS/Dakar/G650GS/G650GS Sertao（シルバーフレーム）

価格184103円

●メーカー品番：01-300-6022-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 115 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：2 x aluminium pannier Zega Pro2 And-Black 45 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

デイトナ DAYTONA 79123 GIVI BF15 タンクバック イージーロック アタッチメント BMW F650GS/F700GS/F800GS

価格6178円

適合車種：BMWF650GS/F700GS/F800GS（'08〜'13）タンクロックバッグ装着に必要！車種別イージーロック！※車種によっては、タンクキャップが全開しない場合が御座いますが、使用上問題無く給油する事ができます。※車種によっては、ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックする事はできます。送料は、定形外郵便420円です。宅配便をご希望の方は、関東エリアで500円になります。エコ配をご希望の方は、390円になります。※エコ配の配送エリアはトップページでご確認ください。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2「And-S」アルミニウムパニアシステム 31＋38L BMW F800GS/F700GS/F650GS（Twin）/シルバーフレーム

価格188579円

●メーカー品番：01-048-6031-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 45＋45L BMW F650GS/Dakar/G650GS/Sertao（シルバーフレーム）

価格175406円

●メーカー品番：01-300-5721-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The aluminium pannier system again has a very robust construction．We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle．Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands．The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces．Pillion comfort not restricted in any way．Enhances the enduro and touring appearance of the BMW G650GS ／ Sertao ／ F650GS ／ F650GS Dakar．The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width： 110 cm- stainless steel rackPannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity．Mounting easy to fit．Uses standard mounting points．No modifications to rear footrests．Mounting bolts are included．Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro．Light and yet sturdy， the case is available in a 45／45 litre version， made entirely of 1．5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）．You’ll find no leaky welded seams along the edges．High quality silicone seals ensure that the contents of this case are protected as well as possible．The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall．The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges．The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye．Thus， for instance， a clever handle can be added to the lid．The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat．Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories．The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate．The advantages at a glance：- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs．Delivery schedule of the system：2 aluminium pannier Zega Pro ＊And-S＊ 45 l 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意：※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 45＋45L BMW F650GS/Dakar/G650GS/Sertao（シルバーフレーム）

価格175406円

●メーカー品番：01-300-5721-0●適合車種：BMW・G650GS Sertao／F650GS／Dakar●備考：The aluminium pannier system again has a very robust construction．We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle．Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands．The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces．Pillion comfort not restricted in any way．Enhances the enduro and touring appearance of the BMW G650GS ／ Sertao ／ F650GS ／ F650GS Dakar．The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width： 110 cm- stainless steel rackPannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity．Mounting easy to fit．Uses standard mounting points．No modifications to rear footrests．Mounting bolts are included．Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro．Light and yet sturdy， the case is available in a 45／45 litre version， made entirely of 1．5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）．You’ll find no leaky welded seams along the edges．High quality silicone seals ensure that the contents of this case are protected as well as possible．The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall．The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges．The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye．Thus， for instance， a clever handle can be added to the lid．The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat．Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories．The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate．The advantages at a glance：- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs．Delivery schedule of the system：2 aluminium pannier Zega Pro ＊And-S＊ 45 l 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意：※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

ページ：TOP / 1 /2 /3 /4 /5 /6 /