TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80G/S(80-88)

価格29496円

●メーカー品番:01-040-7426-0●適合付帯条件:1980-1988年(BMW・R80G/S)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80G/S. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80G/S *80-88* *As with all suspension solutions, the rear and front of the motorbike should be modified together. => The suitable component for the rear of the BMW R80G/S is:=> ?hlins *rear* shock absorber for BMW R80G/S & R80G/S Dakar Typ * S46 PR1C1* 01-040-0428-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80G/S(80-88)

価格29496円

●メーカー品番:01-040-7426-0●適合付帯条件:1980-1988年(BMW・R80G/S)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80G/S. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80G/S *80-88* *As with all suspension solutions, the rear and front of the motorbike should be modified together. => The suitable component for the rear of the BMW R80G/S is:=> ?hlins *rear* shock absorber for BMW R80G/S & R80G/S Dakar Typ * S46 PR1C1* 01-040-0428-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80G/S Dakar(80-88)

価格29496円

●メーカー品番:01-040-7427-0●適合付帯条件:1880-1988年(BMW・R80G/S Dakar)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80G/S Dakar. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80G/S Dakar *80-88* *As with all suspension solutions, the rear and front of the motorbike should be modified together. => The suitable component for the rear of the BMW R80G/S Dakar is:=> ?hlins *rear* shock absorber for BMW R80G/S & R80G/S Dakar Typ * S46 PR1C1* 01-040-0428-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80G/S Dakar(80-88)

価格29496円

●メーカー品番:01-040-7427-0●適合付帯条件:1880-1988年(BMW・R80G/S Dakar)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80G/S Dakar. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80G/S Dakar *80-88* *As with all suspension solutions, the rear and front of the motorbike should be modified together. => The suitable component for the rear of the BMW R80G/S Dakar is:=> ?hlins *rear* shock absorber for BMW R80G/S & R80G/S Dakar Typ * S46 PR1C1* 01-040-0428-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80GS(88-97)

価格30788円

●メーカー品番:01-040-7428-0●適合付帯条件:1988-1997年(BMW・R80GS)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80GS. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80GS *88-97* *As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The suitable component for the rear of the BMW R80GS is:=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level1* 01-058-0005-0=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level2* 01-058-0007-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80GS(88-97)

価格30788円

●メーカー品番:01-040-7428-0●適合付帯条件:1988-1997年(BMW・R80GS)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80GS. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80GS *88-97* *As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The suitable component for the rear of the BMW R80GS is:=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level1* 01-058-0005-0=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level2* 01-058-0007-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80GS Paris Dakar(88-97)

価格30961円

●メーカー品番:01-040-7429-0●適合付帯条件:1988-1997年(BMW・R80GS Paris Dakar)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80GS Paris Dakar. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80GS Paris Dakar *88-97* *As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The suitable component for the rear of the BMW R80GS Paris Dakar is:=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level1* 01-058-0005-0=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level2* 01-058-0007-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】フロントフォークスプリング BMW R80GS Paris Dakar(88-97)

価格30961円

●メーカー品番:01-040-7429-0●適合付帯条件:1988-1997年(BMW・R80GS Paris Dakar)●備考:These progressive fork springs are perfectly matched to the fork on the BMW R80GS Paris Dakar. They make the fork better suited to the demands of motorcycle touring. You will also experience a significantly improved response and greater reserves in extreme situations. The fork springs are made in Europe by Dutch suspension specialists Hyperpro.Info: Only fits * BMW R80GS Paris Dakar *88-97* *As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The suitable component for the rear of the BMW R80GS Paris Dakar is:=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level1* 01-058-0005-0=> Touratech Suspension *rear* shock absorber for BMW R80GS Typ *Level2* 01-058-0007-0=> If only one component is changed, optimal handling will not be achieved.Delivery includes detailed installation instructions, the correct fork oil and a special paste that improves the suspension action.※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

2輪 サインハウス ビチューボ リアサスペンション Viaggio [XZE 01] 00063533 BMW R80G/S 1981年〜1988年

価格87265円

バイク 二輪 モーター サイクル オートバイ 2輪車 二輪車 モーターバイク モーターサイクル motorcycle motorbike autobicycle さいんはうす スプリング 車高調整 サスペンション リアサス ビーエムダブリュー 輸入車 カスタム SYGN HOUSE ビアジオ ヴィアッジオ Bitubo入数:1台分仕様:シリンダー45mmシャフト14mmリアモノショックスプリングADJリバウンドADJレッドスプリングCNCマシングで精密加工されたアルミが美しいショックアブソーバー。ルックスと等しく運動性能にも拘りオイル・ガスセパレーターや硬質アルミ削り出しピストン、ロッドとボディに低フリクションスチールが高い運動性能を発揮します。リバウンド、プリロードのアジャスト機構を備え、様々なサスセッティングに応えます。車種により形状が異なる場合がございます。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 サインハウス ビチューボ リアサスペンション Viaggio [XZE 01] 00063533 BMW R80G/S 1981年〜1988年

価格87265円

バイク 二輪 モーター サイクル オートバイ 2輪車 二輪車 モーターバイク モーターサイクル motorcycle motorbike autobicycle さいんはうす スプリング 車高調整 サスペンション リアサス ビーエムダブリュー 輸入車 カスタム SYGN HOUSE ビアジオ ヴィアッジオ Bitubo入数:1台分仕様:シリンダー45mmシャフト14mmリアモノショックスプリングADJリバウンドADJレッドスプリングCNCマシングで精密加工されたアルミが美しいショックアブソーバー。ルックスと等しく運動性能にも拘りオイル・ガスセパレーターや硬質アルミ削り出しピストン、ロッドとボディに低フリクションスチールが高い運動性能を発揮します。リバウンド、プリロードのアジャスト機構を備え、様々なサスセッティングに応えます。車種により形状が異なる場合がございます。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

TOURATECH ツラーテック【R80G/S用】Touratech サスペンション・ショックアブソーバー BMW R100GS/ PD/ R80GS (1988-) タイプ:レベル1

価格110745円

●メーカー品番:01-058-0005-0●適合付帯条件:1988年以降(BMW・R100GS/ PD、R80GS)●備考:This shock absorber is the right choice for normal touring on the BMW R100GS/PD & R80GS. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer’s standard components. To compensate for large luggage loads, the spring preload can be adjusted using an adjustment tool. The damping setting on this Level1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements. Facts at a glance:=> This shock absorber is configured and adjusted ready for use based on our experience with the BMW R100GS/PD & R80GS.=> The parameters are: vehicle weight / shock absorber pivot point / design constraints / test rides.=> This shock absorber is designed for a rider’s weight including luggage of up to 100 kg.=> As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The matching component for the front of the BMW R100GS/PD & R80GS is the:=> Progressive replacement fork springs, Wirth BMW R100GS / R80GS 01-040-0484-0=> Progressive replacement fork springs, Wirth BMW R100GS / Paris Dakar 01-040-0450-0=> If only one component is changed, optimal handling will not be achieved.The equipment fitted here, with its adjustment capabilities, is sufficient if the suspension only occasionally needs to be adjusted for different loading conditions.Characteristics of the Touratech Suspension Level1 shock absorber:=> The shock absorber body is made of aluminium. *** This keeps its weight to a minimum. => Special low-friction seals are fitted.*** As a result, there is very little wear and the shock absorber has a long service life.=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye. *** They make sure the securing bolt is seated firmly with no play even under maximum loads.=> All assemblies and components are designed for intense use on heavy touring motorcycles. => The damper settings were developed in line with Touratech’s experience and requirements.*** They are based on many miles travelled and experiences gained from use by the Touratech Race Team.=> Floating piston design. The floating piston separates the damping fluids ? oil and nitrogen ? allowing them to work separately.*** Finer shock absorber response. *** Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks). *** Shock absorber cools better. *** Minimal restrictions for the shock absorber’s fitting position on the motorbike.=> QR barcode on the shock absorber contains individual shock absorber data.*** Simply scan with a smartphone to access the specific information for the shock absorber.*** Information on the shock absorber’s factory settings is always available. Can be reset if incorrectly adjusted. The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate. Please fill out our suspension check form and send it back to us.If you have any further questions, we will be happy to advise you. Contact us.●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】Touratech サスペンション・ショックアブソーバー BMW R100GS/ PD/ R80GS (1988-) タイプ:レベル1

価格110745円

●メーカー品番:01-058-0005-0●適合付帯条件:1988年以降(BMW・R100GS/ PD、R80GS)●備考:This shock absorber is the right choice for normal touring on the BMW R100GS/PD & R80GS. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer’s standard components. To compensate for large luggage loads, the spring preload can be adjusted using an adjustment tool. The damping setting on this Level1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements. Facts at a glance:=> This shock absorber is configured and adjusted ready for use based on our experience with the BMW R100GS/PD & R80GS.=> The parameters are: vehicle weight / shock absorber pivot point / design constraints / test rides.=> This shock absorber is designed for a rider’s weight including luggage of up to 100 kg.=> As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The matching component for the front of the BMW R100GS/PD & R80GS is the:=> Progressive replacement fork springs, Wirth BMW R100GS / R80GS 01-040-0484-0=> Progressive replacement fork springs, Wirth BMW R100GS / Paris Dakar 01-040-0450-0=> If only one component is changed, optimal handling will not be achieved.The equipment fitted here, with its adjustment capabilities, is sufficient if the suspension only occasionally needs to be adjusted for different loading conditions.Characteristics of the Touratech Suspension Level1 shock absorber:=> The shock absorber body is made of aluminium. *** This keeps its weight to a minimum. => Special low-friction seals are fitted.*** As a result, there is very little wear and the shock absorber has a long service life.=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye. *** They make sure the securing bolt is seated firmly with no play even under maximum loads.=> All assemblies and components are designed for intense use on heavy touring motorcycles. => The damper settings were developed in line with Touratech’s experience and requirements.*** They are based on many miles travelled and experiences gained from use by the Touratech Race Team.=> Floating piston design. The floating piston separates the damping fluids ? oil and nitrogen ? allowing them to work separately.*** Finer shock absorber response. *** Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks). *** Shock absorber cools better. *** Minimal restrictions for the shock absorber’s fitting position on the motorbike.=> QR barcode on the shock absorber contains individual shock absorber data.*** Simply scan with a smartphone to access the specific information for the shock absorber.*** Information on the shock absorber’s factory settings is always available. Can be reset if incorrectly adjusted. The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate. Please fill out our suspension check form and send it back to us.If you have any further questions, we will be happy to advise you. Contact us.●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】サスペンション リア用ショックアブソーバー BMW R100GS/PD/R80GS(1988-)タイプ:レベル2

価格159133円

●メーカー品番:01-058-0007-0●適合付帯条件:1988年以降(BMW・R100GS/PD/R80GS)●備考:The Level 2 shock absorber for the BMW R100GS/PD & R80GS is the right choice for long distance riding and touring use. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design, hydraulic preload and fine damping adjustment enable a more suitable suspension setup for different loading conditions than is possible with the bike manufacturer’s standard components. You can easily and quickly restore the bike’s balance via a hand wheel that adjusts the hydraulic spring preload. The damping setting on this Level 2 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements. Facts at a glance: => This shock absorber is configured and adjusted ready for use based on our experience with the BMW R100GS/PD & R80GS. => The parameters are: vehicle weight / shock absorber pivot point / design constraints / test rides. => This shock absorber is designed for a rider’s weight including luggage of up to 100 kg. => As with all suspension solutions, the rear and front of the motorbike should be modified together. => The matching component for the front of the BMW R100GS/PD & R80GS is the => progressive replacement fork springs, for BMW R80/100GS Art Nr: 01-040-7413-0 => progressive replacement fork springs, for BMW R100GS Paris Dakar Art Nr: 01-040-7414-0 If only one component is changed, optimal handling will not be achieved. A shock absorber that makes it easy and convenient to adjust your bike for different loading conditions. Characteristics of the Touratech Suspension Level 2 shock absorber: => The shock absorber body is made of aluminium. *** This keeps its weight to a minimum. => Special low-friction seals are fitted. *** As a result, there is very little wear and the shock absorber has a long service life. => Strong stainless steel bushings for the securing bolts are fitted to the spring eye. *** They make sure the securing bolt is seated firmly with no play even under maximum loads. => All assemblies and components are designed for intense use on heavy touring motorcycles. => The damper settings were developed in line with Touratech’s experience and requirements. *** They are based on many miles travelled and experiences gained from use by the Touratech Race Team. => Floating piston design. The floating piston separates the damping fluids - oil and nitrogen - allowing them to work separately. *** Finer shock absorber response. *** Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks). *** Shock absorber cools better. *** Minimal restrictions for the shock absorber’s fitting position on the motorbike. => High End hydraulic preload via an easily accessible, well positioned hand wheel. => QR barcode on the shock absorber contains individual shock absorber data. *** Simply scan with a smartphone to access the specific information for the shock absorber. *** Information on the shock absorber’s factory settings is always available. Can be reset if incorrectly adjusted. The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate. Please fill out our suspension check form and send it back to us. If you have any further questions, we will be happy to advise you. Contact us. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。 その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R80G/S用】サスペンション リア用ショックアブソーバー BMW R100GS/PD/R80GS(1988-)タイプ:レベル2

価格159133円

●メーカー品番:01-058-0007-0●適合付帯条件:1988年以降(BMW・R100GS/PD/R80GS)●備考:The Level 2 shock absorber for the BMW R100GS/PD & R80GS is the right choice for long distance riding and touring use. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design, hydraulic preload and fine damping adjustment enable a more suitable suspension setup for different loading conditions than is possible with the bike manufacturer’s standard components. You can easily and quickly restore the bike’s balance via a hand wheel that adjusts the hydraulic spring preload. The damping setting on this Level 2 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements. Facts at a glance: => This shock absorber is configured and adjusted ready for use based on our experience with the BMW R100GS/PD & R80GS. => The parameters are: vehicle weight / shock absorber pivot point / design constraints / test rides. => This shock absorber is designed for a rider’s weight including luggage of up to 100 kg. => As with all suspension solutions, the rear and front of the motorbike should be modified together. => The matching component for the front of the BMW R100GS/PD & R80GS is the => progressive replacement fork springs, for BMW R80/100GS Art Nr: 01-040-7413-0 => progressive replacement fork springs, for BMW R100GS Paris Dakar Art Nr: 01-040-7414-0 If only one component is changed, optimal handling will not be achieved. A shock absorber that makes it easy and convenient to adjust your bike for different loading conditions. Characteristics of the Touratech Suspension Level 2 shock absorber: => The shock absorber body is made of aluminium. *** This keeps its weight to a minimum. => Special low-friction seals are fitted. *** As a result, there is very little wear and the shock absorber has a long service life. => Strong stainless steel bushings for the securing bolts are fitted to the spring eye. *** They make sure the securing bolt is seated firmly with no play even under maximum loads. => All assemblies and components are designed for intense use on heavy touring motorcycles. => The damper settings were developed in line with Touratech’s experience and requirements. *** They are based on many miles travelled and experiences gained from use by the Touratech Race Team. => Floating piston design. The floating piston separates the damping fluids - oil and nitrogen - allowing them to work separately. *** Finer shock absorber response. *** Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks). *** Shock absorber cools better. *** Minimal restrictions for the shock absorber’s fitting position on the motorbike. => High End hydraulic preload via an easily accessible, well positioned hand wheel. => QR barcode on the shock absorber contains individual shock absorber data. *** Simply scan with a smartphone to access the specific information for the shock absorber. *** Information on the shock absorber’s factory settings is always available. Can be reset if incorrectly adjusted. The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate. Please fill out our suspension check form and send it back to us. If you have any further questions, we will be happy to advise you. Contact us. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。 その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

【BMW R80GS】 OHLINS リアサスペンション

価格107564円

■商品番号BM836■商品概要・シリンダー構造:シングルチューブ・ピストン径:46mm・シリンダー内フリーピストン:内蔵・リバウンド(伸側)減衰力調整機能:ありタイプ形状:S46DR1弊社取扱のオーリンズはカロッツェリア ジャパンの正規輸入品です。■適合車種▼BMWR100GS 87-94R100 PD 87-94R80GS 87-94R80 PD 87-94■詳細説明【S46 リアショックアブソーバーの主な特徴・メリット】・車種別専用設計・スクーターからツアラー、ハイパースポーツまで幅広いラインナップ・シングルチューブ&多段積層バルブにより、全速度域において正確で安定した減衰力を発生・高い加工精度と高品質素材による優れた初期作動性・適正なスプリングプリロード量と、リニアなフィーリングのシングルレートスプリング・完全分解設計コンセプト。オーバーホールすることで性能の回復が可能・オプションスプリングを多数設定。ライダーや車両に合わせたセッティングが可能■注意点font color=#ff0000弊社取扱のオーリンズ製品は全てカロッツェリアジャパンの正規輸入品です。/font※画像はイメージです。ご購入に際しましては、表記しております各種諸元ををよくご確認の上お買い求め下さい。また、商品説明のテキストについては、当該グレードの代表モデルのものとなっておりますので、こちらも改めてスペックをよくご確認下さい。

詳細を確認する

【BMW R80GS】 OHLINS リアサスペンション

価格107564円

■商品番号BM317■商品概要・シリンダー構造:シングルチューブ・ピストン径:46mm・ピギーバック式リザーバータンク搭載・リバウンド(伸側)減衰力調整機能:あり・コンプレッション(圧側)減衰力調整機能:ありタイプ形状:S46PR1C1弊社取扱のオーリンズはカロッツェリア ジャパンの正規輸入品です。■適合車種▼BMWR80GS 80-87■詳細説明【S46 リアショックアブソーバーの主な特徴・メリット】・車種別専用設計・スクーターからツアラー、ハイパースポーツまで幅広いラインナップ・シングルチューブ&多段積層バルブにより、全速度域において正確で安定した減衰力を発生・高い加工精度と高品質素材による優れた初期作動性・適正なスプリングプリロード量と、リニアなフィーリングのシングルレートスプリング・完全分解設計コンセプト。オーバーホールすることで性能の回復が可能・オプションスプリングを多数設定。ライダーや車両に合わせたセッティングが可能■注意点font color=#ff0000弊社取扱のオーリンズ製品は全てカロッツェリアジャパンの正規輸入品です。/font※画像はイメージです。ご購入に際しましては、表記しております各種諸元ををよくご確認の上お買い求め下さい。また、商品説明のテキストについては、当該グレードの代表モデルのものとなっておりますので、こちらも改めてスペックをよくご確認下さい。

詳細を確認する

【セール特価!】 【BMW R80GS】 bitubo リアサスペンション CZE01

価格85099円

■商品番号00063537■商品概要!--taxtax--シリンダー:シングルチューブ窒素封入タイプ 外径45mm/ピストン40mmロッド径:16mmプリロード:機械式無段階コンプレッション:×リバウンド:7クリック車高調整:×・アンチフリクションスチールボディー・アンチフリクションブッシュ&ロッド・アルミCNC削り出しヘッドパーツ■適合車種▼BMWR80GS 88-94 ■注意点font color=#FF0000予めご了承ください。/font

詳細を確認する

【BMW R80GS】 MUPO GT2 リアサスペンション 標準タイプ

価格98820円

■商品番号A05BMW019A■商品概要製造国:イタリア■適合車種▼BMWR80GS 81-88 ■詳細説明レーシングフィールドで蓄積されたノウハウをフィードバックしたMUPOのベーシックサスペンションはストリートからスポーツ走行レベルをカバー。純正サスペンションのリプレイス品としてもお勧めです。■注意点※取付は必ず専門の業者に依頼して下さい。※車高調整不可。※画像はイメージです。

詳細を確認する

【セール特価!】 【BMW R80GS】 TNK インナーチューブ リプレイスシリーズ

価格24840円

■商品番号0050164■商品概要カラー:クローム入数:1本■適合車種▼BMWBOXER 【年式】81-84【適合その他情報】純正メーカー品番:31.42.1.241.655 直径(mm):36 長さ(mm):614 R80GS 【年式】80-87【適合その他情報】純正メーカー品番:31.42.1.241.655 直径(mm):36 長さ(mm):614 R80RT 【年式】83【適合その他情報】純正メーカー品番:31.42.1.241.655 直径(mm):36 長さ(mm):614 R100 【年式】81【適合その他情報】純正メーカー品番:31.42.1.241.655 直径(mm):36 長さ(mm):614 R100 【年式】81【適合その他情報】CS 純正メーカー品番:31.42.1.241.655 直径(mm):36 長さ(mm):614 R100RT 【年式】81【適合その他情報】純正メーカー品番:31.42.1.241.655 直径(mm):36 長さ(mm):614 R100T 【年式】81【適合その他情報】純正メーカー品番:31.42.1.241.655 直径(mm):36 長さ(mm):614 ■詳細説明メーカー純正品が廃盤になってしまっている旧車、そして希少な輸入車までもカバーする多彩なラインナップを誇る「TNKインナーチューブ リプレイスシリーズ」。いいものを長く使い続ける文化と多くのサスペンションメーカーを抱え、 高い技術を持つことで知られるイタリアならではの高い加工精度を誇るハイクオリティーなTNKインナーチューブ。高荷重を受けると共に100分の1mm単位の高い精度を要求されるインナーチューブ。TNKインナーチューブはモトGPクオリティーの高い品質でその要求に応える。操縦安定性に最も影響を与えるインナーチューブだからこそ、リペアではない、より理想的なリプレイス(交換)という選択肢へ・・・。■注意点※バイク1台に2本必要となります。※脱着には高度な技術が必要となりますので、サスペンション関連の専門店へご相談ください。※純正品番が使用予定のバイクと違う場合には、車名・年式が合致しても形や寸法が違いますのでご注意ください。(車輌仕向け地により、部品が違うことがあるため)※シール部品、ブッシュ部品などインナーチューブ以外のものは付属されておりません。メーカー純正品をお客様ご自身でご用意ください。※製品改良・相場の変動により、価格・仕様は予告無く変更される場合があります。※製品は原則として標準車への装着を前提としています。

詳細を確認する

【BMW R80GS】 MUPO AB3 リアサスペンション 標準タイプ

価格142560円

■商品番号A03BMW019■商品概要製造国:イタリア構成パーツは削り出し製。■適合車種▼BMWR80GS 81-88 ■詳細説明レーシングフィールドで蓄積されたノウハウをフィードバックしたサスペンションはAB2と同等の性能でストリートからスポーツ走行レベルをカバー、車高調整は不可。純正サスペンションに限界を感じたらお試し下さい。■注意点※取付は必ず専門の業者に依頼して下さい。

詳細を確認する

2輪 サインハウス ビチューボ フロントフォークスプリング 00064423 BMW R80GS 1987年〜

価格20521円

バイク 二輪 モーター サイクル オートバイ 2輪車 二輪車 モーターバイク モーターサイクル motorcycle motorbike autobicycle さいんはうす ビーエムダブリュー 輸入車 カスタム SYGN HOUSE Bitubo入数:1台分仕様:プログレッシブフロントサスチューンの第一歩はフォークスプリングキットから。スプリング素材にはCrSi合金鋼を使用し、低価格ながら性能と信頼性を高次元でバランスさせています。プログレッシブおよびシングルレートのスプリングをラインナップし、一部車種に設定のシングルレートスプリングはバネレートの選択が可能です。車種により形状が異なる場合がございます。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 サインハウス ビチューボ フロントフォークスプリング 00064423 BMW R80GS 1987年〜

価格20521円

バイク 二輪 モーター サイクル オートバイ 2輪車 二輪車 モーターバイク モーターサイクル motorcycle motorbike autobicycle さいんはうす ビーエムダブリュー 輸入車 カスタム SYGN HOUSE Bitubo入数:1台分仕様:プログレッシブフロントサスチューンの第一歩はフォークスプリングキットから。スプリング素材にはCrSi合金鋼を使用し、低価格ながら性能と信頼性を高次元でバランスさせています。プログレッシブおよびシングルレートのスプリングをラインナップし、一部車種に設定のシングルレートスプリングはバネレートの選択が可能です。車種により形状が異なる場合がございます。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 サインハウス ビチューボ リアサスペンション Viaggio [CZE 01] 00063537 BMW R80GS 1988年〜1994年

価格87265円

バイク 二輪 モーター サイクル オートバイ 2輪車 二輪車 モーターバイク モーターサイクル motorcycle motorbike autobicycle さいんはうす スプリング 車高調整 サスペンション リアサス ビーエムダブリュー 輸入車 カスタム SYGN HOUSE ビアジオ ヴィアッジオ Bitubo入数:1台分仕様:シリンダー45mmシャフト16mmリアモノショックスプリングADJリバウンドADJレッドスプリングCNCマシングで精密加工されたアルミが美しいショックアブソーバー。ルックスと等しく運動性能にも拘りオイル・ガスセパレーターや硬質アルミ削り出しピストン、ロッドとボディに低フリクションスチールが高い運動性能を発揮します。リバウンド、プリロードのアジャスト機構を備え、様々なサスセッティングに応えます。車種により形状が異なる場合がございます。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 サインハウス ビチューボ リアサスペンション Viaggio [CZE 01] 00063537 BMW R80GS 1988年〜1994年

価格87265円

バイク 二輪 モーター サイクル オートバイ 2輪車 二輪車 モーターバイク モーターサイクル motorcycle motorbike autobicycle さいんはうす スプリング 車高調整 サスペンション リアサス ビーエムダブリュー 輸入車 カスタム SYGN HOUSE ビアジオ ヴィアッジオ Bitubo入数:1台分仕様:シリンダー45mmシャフト16mmリアモノショックスプリングADJリバウンドADJレッドスプリングCNCマシングで精密加工されたアルミが美しいショックアブソーバー。ルックスと等しく運動性能にも拘りオイル・ガスセパレーターや硬質アルミ削り出しピストン、ロッドとボディに低フリクションスチールが高い運動性能を発揮します。リバウンド、プリロードのアジャスト機構を備え、様々なサスセッティングに応えます。車種により形状が異なる場合がございます。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

TOURATECH ツラーテック【R100GSパリダカ用】Touratech サスペンション・ショックアブソーバー BMW R100GS/ PD/ R80GS (1988-) タイプ:レベル1

価格110745円

●メーカー品番:01-058-0005-0●適合付帯条件:1988年以降(BMW・R100GS/ PD、R80GS)●備考:This shock absorber is the right choice for normal touring on the BMW R100GS/PD & R80GS. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer’s standard components. To compensate for large luggage loads, the spring preload can be adjusted using an adjustment tool. The damping setting on this Level1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements. Facts at a glance:=> This shock absorber is configured and adjusted ready for use based on our experience with the BMW R100GS/PD & R80GS.=> The parameters are: vehicle weight / shock absorber pivot point / design constraints / test rides.=> This shock absorber is designed for a rider’s weight including luggage of up to 100 kg.=> As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The matching component for the front of the BMW R100GS/PD & R80GS is the:=> Progressive replacement fork springs, Wirth BMW R100GS / R80GS 01-040-0484-0=> Progressive replacement fork springs, Wirth BMW R100GS / Paris Dakar 01-040-0450-0=> If only one component is changed, optimal handling will not be achieved.The equipment fitted here, with its adjustment capabilities, is sufficient if the suspension only occasionally needs to be adjusted for different loading conditions.Characteristics of the Touratech Suspension Level1 shock absorber:=> The shock absorber body is made of aluminium. *** This keeps its weight to a minimum. => Special low-friction seals are fitted.*** As a result, there is very little wear and the shock absorber has a long service life.=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye. *** They make sure the securing bolt is seated firmly with no play even under maximum loads.=> All assemblies and components are designed for intense use on heavy touring motorcycles. => The damper settings were developed in line with Touratech’s experience and requirements.*** They are based on many miles travelled and experiences gained from use by the Touratech Race Team.=> Floating piston design. The floating piston separates the damping fluids ? oil and nitrogen ? allowing them to work separately.*** Finer shock absorber response. *** Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks). *** Shock absorber cools better. *** Minimal restrictions for the shock absorber’s fitting position on the motorbike.=> QR barcode on the shock absorber contains individual shock absorber data.*** Simply scan with a smartphone to access the specific information for the shock absorber.*** Information on the shock absorber’s factory settings is always available. Can be reset if incorrectly adjusted. The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate. Please fill out our suspension check form and send it back to us.If you have any further questions, we will be happy to advise you. Contact us.●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R100GS用】Touratech サスペンション・ショックアブソーバー BMW R100GS/ PD/ R80GS (1988-) タイプ:レベル1

価格110745円

●メーカー品番:01-058-0005-0●適合付帯条件:1988年以降(BMW・R100GS/ PD、R80GS)●備考:This shock absorber is the right choice for normal touring on the BMW R100GS/PD & R80GS. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer’s standard components. To compensate for large luggage loads, the spring preload can be adjusted using an adjustment tool. The damping setting on this Level1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements. Facts at a glance:=> This shock absorber is configured and adjusted ready for use based on our experience with the BMW R100GS/PD & R80GS.=> The parameters are: vehicle weight / shock absorber pivot point / design constraints / test rides.=> This shock absorber is designed for a rider’s weight including luggage of up to 100 kg.=> As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The matching component for the front of the BMW R100GS/PD & R80GS is the:=> Progressive replacement fork springs, Wirth BMW R100GS / R80GS 01-040-0484-0=> Progressive replacement fork springs, Wirth BMW R100GS / Paris Dakar 01-040-0450-0=> If only one component is changed, optimal handling will not be achieved.The equipment fitted here, with its adjustment capabilities, is sufficient if the suspension only occasionally needs to be adjusted for different loading conditions.Characteristics of the Touratech Suspension Level1 shock absorber:=> The shock absorber body is made of aluminium. *** This keeps its weight to a minimum. => Special low-friction seals are fitted.*** As a result, there is very little wear and the shock absorber has a long service life.=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye. *** They make sure the securing bolt is seated firmly with no play even under maximum loads.=> All assemblies and components are designed for intense use on heavy touring motorcycles. => The damper settings were developed in line with Touratech’s experience and requirements.*** They are based on many miles travelled and experiences gained from use by the Touratech Race Team.=> Floating piston design. The floating piston separates the damping fluids ? oil and nitrogen ? allowing them to work separately.*** Finer shock absorber response. *** Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks). *** Shock absorber cools better. *** Minimal restrictions for the shock absorber’s fitting position on the motorbike.=> QR barcode on the shock absorber contains individual shock absorber data.*** Simply scan with a smartphone to access the specific information for the shock absorber.*** Information on the shock absorber’s factory settings is always available. Can be reset if incorrectly adjusted. The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate. Please fill out our suspension check form and send it back to us.If you have any further questions, we will be happy to advise you. Contact us.●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【R100GS用】Touratech サスペンション・ショックアブソーバー BMW R100GS/ PD/ R80GS (1988-) タイプ:レベル1

価格110745円

●メーカー品番:01-058-0005-0●適合付帯条件:1988年以降(BMW・R100GS/ PD、R80GS)●備考:This shock absorber is the right choice for normal touring on the BMW R100GS/PD & R80GS. This type of shock absorber offers a large adjustment range with plenty of reserves to meet the demands of motorbike travel. Its floating piston design and fine damping adjustment enable a more suitable suspension setup and better balance than is possible with the bike manufacturer’s standard components. To compensate for large luggage loads, the spring preload can be adjusted using an adjustment tool. The damping setting on this Level1 shock allows the necessary degree of control over the bump and rebound to adjust the shock absorber to suit your individual ride comfort requirements. Facts at a glance:=> This shock absorber is configured and adjusted ready for use based on our experience with the BMW R100GS/PD & R80GS.=> The parameters are: vehicle weight / shock absorber pivot point / design constraints / test rides.=> This shock absorber is designed for a rider’s weight including luggage of up to 100 kg.=> As with all suspension solutions, the rear and front of the motorbike should be modified together.=> The matching component for the front of the BMW R100GS/PD & R80GS is the:=> Progressive replacement fork springs, Wirth BMW R100GS / R80GS 01-040-0484-0=> Progressive replacement fork springs, Wirth BMW R100GS / Paris Dakar 01-040-0450-0=> If only one component is changed, optimal handling will not be achieved.The equipment fitted here, with its adjustment capabilities, is sufficient if the suspension only occasionally needs to be adjusted for different loading conditions.Characteristics of the Touratech Suspension Level1 shock absorber:=> The shock absorber body is made of aluminium. *** This keeps its weight to a minimum. => Special low-friction seals are fitted.*** As a result, there is very little wear and the shock absorber has a long service life.=> Strong stainless steel bushings for the securing bolts are fitted to the spring eye. *** They make sure the securing bolt is seated firmly with no play even under maximum loads.=> All assemblies and components are designed for intense use on heavy touring motorcycles. => The damper settings were developed in line with Touratech’s experience and requirements.*** They are based on many miles travelled and experiences gained from use by the Touratech Race Team.=> Floating piston design. The floating piston separates the damping fluids ? oil and nitrogen ? allowing them to work separately.*** Finer shock absorber response. *** Precise, high-performance damping even with very high damping frequency (bad roads, dirt tracks). *** Shock absorber cools better. *** Minimal restrictions for the shock absorber’s fitting position on the motorbike.=> QR barcode on the shock absorber contains individual shock absorber data.*** Simply scan with a smartphone to access the specific information for the shock absorber.*** Information on the shock absorber’s factory settings is always available. Can be reset if incorrectly adjusted. The basic setup fitted here is designed for riders up to 100 kg including luggage. Modifications are possible for a heavier rider (more than 100 kg) and/or if the bike is usually ridden with a passenger / with luggage. In this case, we individually modify the shock absorber to meet your needs by fitting a spring with a higher spring rate. Please fill out our suspension check form and send it back to us.If you have any further questions, we will be happy to advise you. Contact us.●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

ページ:TOP / 1 /2 /