TOURATECH ツラーテックタンクバッグ BMW F650GS/Dakar/TT39 G650GS

価格23297円

●メーカー品番:01-300-5801-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:Our tank bag for the F650GS single-cylinder models has proven itself for many years and over innumerable kilometres around the globe.But even good things can be improved!We have given the side pockets a new form and position. Moved slightly further back and with an optimised contour, accidental actuation of the turn flashers or horn when turning the handlebar is now prevented.A reflective elastic strap on the side is now provided for holding your gloves or balaclava, for example.Reinforcements in the side walls keep the Touratech tank bag for the F650GS absolutely in shape even when only half-filled.The volume can be increased from 18 litres to 25 litres simply by opening the all-round zip, transport is simple thanks to a sturdy carrying handle, and it can be used as a rucksack with the straps supplied.The map pocket (28 x 32 cm) is simply attached to the tank bag with large Velcro fasteners and can be removed.A rain cover (055-0069) is available as an accessory.Colour: blackSize: (L x W x H): approx. 31 x 29 x 22/32 cmMade from Teflon-coated CORDURA which is both water-repellent and dirt-resistant.Made in Germany by KAHEDO.●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックタンクバッグ BMW F650GS/Dakar/TT39 G650GS

価格23297円

●メーカー品番:01-300-5801-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:Our tank bag for the F650GS single-cylinder models has proven itself for many years and over innumerable kilometres around the globe.But even good things can be improved!We have given the side pockets a new form and position. Moved slightly further back and with an optimised contour, accidental actuation of the turn flashers or horn when turning the handlebar is now prevented.A reflective elastic strap on the side is now provided for holding your gloves or balaclava, for example.Reinforcements in the side walls keep the Touratech tank bag for the F650GS absolutely in shape even when only half-filled.The volume can be increased from 18 litres to 25 litres simply by opening the all-round zip, transport is simple thanks to a sturdy carrying handle, and it can be used as a rucksack with the straps supplied.The map pocket (28 x 32 cm) is simply attached to the tank bag with large Velcro fasteners and can be removed.A rain cover (055-0069) is available as an accessory.Colour: blackSize: (L x W x H): approx. 31 x 29 x 22/32 cmMade from Teflon-coated CORDURA which is both water-repellent and dirt-resistant.Made in Germany by KAHEDO.●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

【BMW G650GS】 ワンダーリッヒ:Wunderlich 汎用リアシート/リアキャリアバック 「ELEPAHNT」

価格34560円

■商品番号W44150-000■商品概要容量:20L■適合車種▼BMWF650GS -07F650GS 08-F650GS Dakar [ダカール] F700GS F800GS F800GS Adventure [アドベンチャー] F800GT F800R F800S F800ST G650GS G650GS SERTAO [セルタオ] G650 XCHALLENGE[クロスチャレンジ] G650 XCOUNTRY[クロスカントリー] G650 XMOTO[クロスモト] HP2 ENDURO HP2 Megamoto K1200R K1200R SportK1200S K1300R K1300S R1100GS R1100R R1100RS R1100RT R1100S R1150GS R1150GS AdventureR1150R R1150R ROCKSTER [ロックスター] R1150RS R1150RT R1200GS -12R1200GS Adventure [アドベンチャー] -13R1200GS 13-R1200GS Adventure [アドベンチャー] 14-R1200R R1200RT 14-RnineT ■詳細説明マルチな機能を有する高機能軽量リアシート/リアキャリアバック。防水仕様の素材を使用し、急な天候変化にも対応。(完全防水を保証する物ではありません)トップにはグローブなどを収めるのに便利なバンジーロープネットや、左右には小物入れも装備。最大20Lの可変容量。ベルトによリアシート/リアキャリアに固定する汎用タイプです。■注意点※写真はイメージです。掲載画像の取り付け車種、カラーなど、写真と異なる場合がございます。※実際の製品は改良・仕様変更などにより、一部カラー、形状が異なっている場合がございます。※また、撮影の都合上、他商品も画像に写っている場合がありますが表題の商品のみのお届けとなります。※取扱い説明書はすべて英語・その他外国語です。あらかじめご了承ください。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニアシステム 31+31L BMW F650GS/Dakar G650GS/Sertao

価格181778円

●メーカー品番:01-300-5702-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used - overall width: 94 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-black* 31 litres1 pannier rack including mounting hardwareDelivery schedule does not include the Rapid-Trap※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニアシステム 31+31L BMW F650GS/Dakar G650GS/Sertao

価格181778円

●メーカー品番:01-300-5702-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used - overall width: 94 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-black* 31 litres1 pannier rack including mounting hardwareDelivery schedule does not include the Rapid-Trap※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

デイトナ DAYTONA 92353 GIVI BF19 タンクバック イージーロック アタッチメント BMW G650GS BENELLI R1200GS

価格6178円

適合車種:BMWG650GS('11〜'14)BENELLIR1200GS('13)タンクロックバッグ装着に必要!車種別イージーロック!※車種によっては、タンクキャップが全開しない場合が御座いますが、使用上問題無く給油する事ができます。※車種によっては、ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックする事はできます。送料は、定形外郵便420円です。宅配便をご希望の方は、関東エリアで500円になります。エコ配をご希望の方は、390円になります。※エコ配の配送エリアはトップページでご確認ください。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニアシステム 38+38L BMW F650GS/Dakar G650GS/Sertao

価格181778円

●メーカー品番:01-300-5712-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used - overall width: 102 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-S* 38 litres1 pannier rack including mounting hardwareDelivery schedule does not include the Rapid-Trap※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

【BMW G650GS】 Puig:プーチ ツーリングスクリーン カラー:ブラック カラー:ブラック カラー:ブラック カラー:ブラック カラー:ブラック

価格21401円

■商品番号2015N■商品概要素材:アクリルスクリーン長:STD(ノーマル)比 +175mmカラー:ブラック■適合車種▼BMWF650GS 04-07G650GS 10■詳細説明空気抵抗の低減と防風効果の両立を目指す事が「RACING SCREENS」の特徴なら、この「TOURING SCREENS」は、最大限の防風効果を目指す事に特化している事が最大の特徴で有ると言えます。より自然な乗車姿勢下でのウインドプロテクションを徹底追求。Puig社風洞による徹底した空力解析と、実走行の繰り返しにより導き出された形状は、いたずらなスクリーンの大型化が招く、ハンドリングやルックスへの悪影響も回避しています。更に、クリアな視界を確保すべく、素材には3mm厚アクリルを採用、ストックスクリーンを凌駕する、ゆがみの無いクリアな視界を実現(ブラック、カーボン等一部カラー製品は透過光率がゼロの製品もございます)。シティーライドからロングツーリングまで、「TOURING SCREENS」は、あらゆるシーンでの快適性向上に貢献します。■注意点※画像はカラー:スモークです。※画像のカラーサンプルはイメージです。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニアシステム 38+38L BMW F650GS/Dakar G650GS/Sertao

価格181778円

●メーカー品番:01-300-5712-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used - overall width: 102 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-S* 38 litres1 pannier rack including mounting hardwareDelivery schedule does not include the Rapid-Trap※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニアシステム 45+45L BMW F650GS/Dakar G650GS/Sertao

価格181778円

●メーカー品番:01-300-5722-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMW G650GS / G650GS Sertao / F650GS / F650GS Dakar. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used - overall width: 110 cm- stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-black* 45 litres1 pannier rack including mounting hardwareDelivery schedule does not include the Rapid-Trap※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニアシステム 45+45L BMW F650GS/Dakar G650GS/Sertao

価格181778円

●メーカー品番:01-300-5722-0●適合車種:BMW G650GS Sertao/F650GS/Dakar●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. Pillion comfort not restricted in any way. Enhances the enduro and touring appearance of the BMW G650GS / G650GS Sertao / F650GS / F650GS Dakar. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used - overall width: 110 cm- stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-black* 45 litres1 pannier rack including mounting hardwareDelivery schedule does not include the Rapid-Trap※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

【送料無料】[ジビ] イージーロック タンクバック取付アタッチメント BF19 / 92353 / [BENELLI]R1200GS('13)、[BMW]G650GS('11?'14)

価格5769円

2015年3月末発売●適合車種[BENELLI]R1200GS('13)、[BMW]G650GS('11?'14)●用途GIVI タンクロック取付用●適合車種[BENELLI]R1200GS('13),[BMW]G650GS('11〜'14)●注この商品だけでの取り付けはできません。別売のタンクロックシリーズと組み合わせてご使用ください。●注2車種によってはタンクキャップが全開しない場合が御座いますが、使用上問題なく給油することができます。●注3ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックすることはできます。●メーカー名GIVI/ジビ●メーカーコード92353●JANコード4909449464144GIVI タンクロックシステム専用 車種別アタッチメントタンクロックシリーズの取り付けに必要になります。欠品・廃盤の場合はメールにてご案内させていただきます。バイクトップ:ツーリング用品:ツーリングバッグ:ガソリンタンクに取付けるタンクバッグ:ジビ/GIVIイージーロック/タンクバッグ用アタッチメント/タンクロックシステム専用車種別アタッチメント/簡単取付/タンクロックシリーズ/便利/荷物/タンクに置く/目が届きやすい/タンクシート/タンクバッグ/バイク

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 45+45L BMW F650GS/Dakar/G650GS/Sertao(シルバーフレーム)

価格175406円

●メーカー品番:01-300-5721-0●適合車種:BMW・G650GS Sertao/F650GS/Dakar●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.Pillion comfort not restricted in any way.Enhances the enduro and touring appearance of the BMW G650GS / Sertao / F650GS / F650GS Dakar.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 110 cm- stainless steel rackPannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-S* 45 l 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 45+45L BMW F650GS/Dakar/G650GS/Sertao(シルバーフレーム)

価格175406円

●メーカー品番:01-300-5721-0●適合車種:BMW・G650GS Sertao/F650GS/Dakar●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.Pillion comfort not restricted in any way.Enhances the enduro and touring appearance of the BMW G650GS / Sertao / F650GS / F650GS Dakar.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 110 cm- stainless steel rackPannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro *And-S* 45 l 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31+31L BMW F650GS/Dakar/G650GS/Sertao(シルバーフレーム)

価格175406円

●メーカー品番:01-300-5701-0●適合車種:BMW・G650GS Sertao/F650GS/Dakar●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.Pillion comfort not restricted in any way.Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 94 cm- stainless steel rack Pannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro*And-S* 31 litres 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31+31L BMW F650GS/Dakar/G650GS/Sertao(シルバーフレーム)

価格175406円

●メーカー品番:01-300-5701-0●適合車種:BMW・G650GS Sertao/F650GS/Dakar●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.Pillion comfort not restricted in any way.Enhances the enduro and touring appearance of the BMWG650GS/Sertao/F650GS/Dakar.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 94 cm- stainless steel rack Pannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro*And-S* 31 litres 1 pannier rack including mounting hardware Delivery schedule does not include the Rapid-Trap●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

ページ:TOP / 1 /2 /