価格18360円
motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 プロト PLOT HEPCO＆BECKER 車体関連＆アクセサリー ビーエムダブリュー ぷろと バッグ タンク ケース積載重量：（ケース重量含む）10.0kg色[カラー]：ブラック加工[有/無]：取り付けには多少の加工が必要な場合がございます適合：F 800 GS[N]WEB結合品名：ヘプコアンドベッカー ブラック ツーリング＆キャンプ商品の詳細な情報については、メーカーサイトでご確認ください。
価格33027円
●メーカー品番：01-048-5804-0●適合車種：BMW F650GS（Twin）／F700GS／F800GS●備考：The “Companero Edition” tank bag matches the colours of the new Touratech Companero motorcycle suit and is specially tailored to the BMW F 800 GS.Its basic volume of approx. 14 litres quickly and easily expands to approx. 20 litres via an all-round zip. Plus two side pockets provide space for your wallet or papers.A reflective elastic strap on the back is handy for holding your gloves during a short stop， for example. Water-repellent zips are used on the main compartment and both side pockets.The map pocket （26 x 28 cm） securely attaches to the tank bag using Velcro. Inside the top cover there is a document compartment with separate credit card pouch and elastic loops to hold small items like a biro.Two clip-buckles at the front and the Velcro fastener at the back ensure the tank bag can be quickly attached to your bike and is held securely.For off-road use and when fully loaded， the tank bag can also be secured using two side straps.A sturdy handle and two rucksack straps （supplied） round out this fully equipped bag.Colours： black， grey， yellow （Companero colours）.Made from Teflon-coated CORDURA which is both waterproof and dirt-resistant.Made in Germany by KAHEDO.Size （L x W x H）： approx. 30 x 33 x 18／26 cmCapacity： approx. 14／20 litres●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】
価格33027円
●メーカー品番：01-048-5804-0●適合車種：BMW F650GS（Twin）／F700GS／F800GS●備考：The “Companero Edition” tank bag matches the colours of the new Touratech Companero motorcycle suit and is specially tailored to the BMW F 800 GS.Its basic volume of approx. 14 litres quickly and easily expands to approx. 20 litres via an all-round zip. Plus two side pockets provide space for your wallet or papers.A reflective elastic strap on the back is handy for holding your gloves during a short stop， for example. Water-repellent zips are used on the main compartment and both side pockets.The map pocket （26 x 28 cm） securely attaches to the tank bag using Velcro. Inside the top cover there is a document compartment with separate credit card pouch and elastic loops to hold small items like a biro.Two clip-buckles at the front and the Velcro fastener at the back ensure the tank bag can be quickly attached to your bike and is held securely.For off-road use and when fully loaded， the tank bag can also be secured using two side straps.A sturdy handle and two rucksack straps （supplied） round out this fully equipped bag.Colours： black， grey， yellow （Companero colours）.Made from Teflon-coated CORDURA which is both waterproof and dirt-resistant.Made in Germany by KAHEDO.Size （L x W x H）： approx. 30 x 33 x 18／26 cmCapacity： approx. 14／20 litres●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】
価格64896円
08年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS送料はサービスです。
価格64896円
08年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS送料はサービスです。
価格38772円
motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 プロト PLOT HEPCO＆BECKER ツーリング＆キャンプ ビーエムダブリュー ぷろと積載重量：(ケース重量含む)片側10.0kg色[カラー]：ブラック加工[有/無]：取り付けには多少の加工が必要な場合がございます材質[素材]：スチール適合：F 800 GS生産国：ドイツ使用上の注意：※取付の際、加工が必要な場合があります。製品不良でない限り、返品はできませんので予めご了承下さい。安全警告：過度な積載や悪路走行により脱落の恐れがあります。走行前に必ずガタツキ、ねじのゆるみ等の点検を行ってください。商品の詳細な情報については、メーカーサイトでご確認ください。
価格49920円
08年-15年 BMW F65008年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS送料はサービスです。
価格187116円
●メーカー品番：01-048-6082-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier ZEGA Pro2 31 litres 1 x aluminium pannier ZEGA Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格7020円
motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 DAYTONA ジビ タンクロック ツーリング ビーエムダブリュー でいとな※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際にタンクバッグとハンドルが接触する場合があります。※構造上、タンクバッグの高さが磁石式の物等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。商品の詳細な情報については、メーカーサイトでご確認ください。
価格7020円
motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 DAYTONA ジビ タンクロック ツーリング ビーエムダブリュー でいとな※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際にタンクバッグとハンドルが接触する場合があります。※構造上、タンクバッグの高さが磁石式の物等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。商品の詳細な情報については、メーカーサイトでご確認ください。
価格7020円
●適合車種[BMW]F650GS/F700GS/F800GS（'08?'13）●用途GIVI タンクロック取付用●適合車種[BMW]F650GS/F700GS/F800GS（'08〜'13）,F800GS Adventure('13〜'14)●注この商品だけでの取り付けはできません。別売のタンクロックシリーズと組み合わせてご使用ください。●注2車種によってはタンクキャップが全開しない場合が御座いますが、使用上問題なく給油することができます。●注3ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックすることはできます。●メーカー名GIVI/ジビ●メーカーコード79123●JANコード4909449435595GIVI タンクロックシステム専用 車種別アタッチメントタンクロックシリーズの取り付けに必要になります。欠品・廃盤の場合はメールにてご案内させていただきます。バイクトップ:ツーリング用品:ツーリングバッグ:ガソリンタンクに取付けるタンクバッグ:ジビ/GIVIイージーロック/タンクバッグ用アタッチメント/タンクロックシステム専用車種別アタッチメント/簡単取付/タンクロックシリーズ/便利/荷物/タンクに置く/目が届きやすい/タンクシート/タンクバッグ/バイク
価格6178円
適合車種：BMWF650GS/F700GS/F800GS（'08〜'13）タンクロックバッグ装着に必要！車種別イージーロック！※車種によっては、タンクキャップが全開しない場合が御座いますが、使用上問題無く給油する事ができます。※車種によっては、ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックする事はできます。送料は、定形外郵便420円です。宅配便をご希望の方は、関東エリアで500円になります。エコ配をご希望の方は、390円になります。※エコ配の配送エリアはトップページでご確認ください。
価格6318円
掲載商品はお取り寄せとなる場合があります。受注完了後に納期等をご連絡致します。■タンクロックシリーズの取り付けに必要になります■メーカー：DAYTONA/デイトナ■モデル名：DAYTONA GIVI BF15 イージーロック BMW F650GS/F750GS/F800GS('08-'13) 品番79123 デイトナ■適合車種例：BMW F650GS/F750GS/F800GS('08-'13)※適合車種はメーカーサイトで確認してください。
価格165332円
●メーカー品番：01-048-6080-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard，lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium，anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look，but also prevents rubbing inside the case． The ultra thick，high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity．Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres1 x aluminium pannier Zega Pro2 38 litres1 x pannier rack including mounting hardware1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格49920円
08年-15年 BMW F65008年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS送料はサービスです。
価格173168円
●メーカー品番：01-048-6030-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres 1 x aluminium pannier Zega Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格180830円
●メーカー品番：01-048-6081-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolution After Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look，but also prevents rubbing inside the case． The ultra thick，high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity．Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格6605円
08年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS送料はサービスです。
価格187116円
●メーカー品番：01-048-6082-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity． Mounting easy to fit．Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier ZEGA Pro2 31 litres 1 x aluminium pannier ZEGA Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格165332円
●メーカー品番：01-048-6080-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard，lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locksAvailable in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium，anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look，but also prevents rubbing inside the case． The ultra thick，high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity．Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres1 x aluminium pannier Zega Pro2 38 litres1 x pannier rack including mounting hardware1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格194779円
●メーカー品番：01-048-6032-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolution After Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-Black 31 litres 1 x aluminium pannier Zega Pro2 And-Black 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格5945円
08年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS08年-15年 カワサキ KLR650送料はサービスです。
価格173168円
●メーカー品番：01-048-6030-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cmRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 31 litres 1 x aluminium pannier Zega Pro2 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格5945円
08年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS08年-15年 カワサキ KLR650送料はサービスです。
価格33048円
【適合車種】BMW F800GS【適合年式】08〜13年※商品画像は79530+79690の装着例の商品画像となります。実際の商品はパニアホルダーのみとなりますのでご注意下さい。ボックスは別途お買い求めが必要です。key：サイドケースホルダーzero821318※商品画像は79530+79690の装着例の商品画像となります。実際の商品はパニアホルダーのみとなりますのでご注意下さい。ボックスは別途お買い求めが必要です。GIVI製TREKKER OBK37/48専用CAMパニアホルダー（サイドケースホルダー）【商品名】OBK37/48専用CAMパニアホルダー（サイドケースホルダー）PL5103CAM【商品番号】G3-79690【メーカー】GIVI（ジビ）【車種メーカー】BMW（ビーエムダブリュー）【適合車種】BMW F800GS【適合年式】08〜13年
価格188579円
●メーカー品番：01-048-6031-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格6605円
08年-15年 BMW F650GS08年-15年 BMW F700GS08年-15年 BMW F800GS送料はサービスです。
価格180830円
●メーカー品番：01-048-6081-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolution After Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use - you could say it’s Plug and play for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism．The lid can stay closed when it is removed from the bike． Pannier on， click - and go！The innovative construction in resilient stainless steel releases the catch before attachment， which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-blackThe anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look，but also prevents rubbing inside the case． The ultra thick，high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions．The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack black- sturdy connecting bar- overall width： 106cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity．Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格188579円
●メーカー品番：01-048-6031-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolutionAfter Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-S 31 litres 1 x aluminium pannier Zega Pro2 And-S 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】
価格194779円
●メーカー品番：01-048-6032-0●適合車種：BMW・F650GS（Twin）／F700GS／F800GS●備考：The next step in evolution After Zega and Zega Pro， we have now developed the Zega Pro2． Based on the Zega Pro，its excellent properties have all been retained， but many details have also been significantly improved．The Zega Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation．Above all， though， the pre-assembled version is an absolute revolution！It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use，facilitating single-handed use ？ you could say it’s “Plug and play” for fully packed aluminium panniers！There’s a single lever on the outside to operate the mechanism． The lid can stay closed when it is removed from the bike． Pannier on， click ？ and go！The innovative construction in resilient stainless steel releases the catch before attachment，which means the Zega Pro2 can also cope with extreme loads．The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier．They are automatically locked when the lid is closed．Panniers：- improved seal profile for precise and even easier use- carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage- optimised ventilation system for easy opening at high pressure differences， e．g． after going through a tunnel- including all the benefits of the award-winning Zega Pro aluminium pannier- also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver AND-S and anodised black AND-black The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case． The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．Mounting：- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside- conveniently positioned release catches， in a protected position between the pannier and seat- including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier．The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions． The new fixation system further reinforces the overall pannier system．Zega Pro2 panniers will fit on almost any Touratech pannier racks． Their special construction offers the option for balancing out any tolerances．Pannier frame- Stainless steel rack- sturdy connecting bar- overall width： 106 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall． Bolted crosspiece for better rigidity． Mounting easy to fit． Uses standard mounting points． No modifications to rear footrests． Mounting bolts are included．Delivery schedule of the system：1 x aluminium pannier Zega Pro2 And-Black 31 litres 1 x aluminium pannier Zega Pro2 And-Black 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】