TOURATECH ツラーテック【ヴェルシス用】サイドスタンドエクステンション Kawasaki Versys 650

価格5198円

●メーカー品番：01-408-5275-0●適合付帯条件：カワサキ・Versys 650●備考：It’s a familiar problem that has tested the temper of many motorcyclists． After riding your bike along rocky， bumpy off-road tracks， you just want to stop for a rest． But that’s easier said than done． Parking your bike on soft ground can be a real problem！ Usually you can’t find a wooden board or something similar to stand the bike on when you need it．Touratech has the solution： the side stand base extension more than doubles the area of the supporting surface， so you won’t find yourself straining to lift the fully laden machine． A mix of stainless steel and black anodised aluminium components ensure the base extension looks good and provide full stability． Securely fixed to the side stand， the base extension is a useful accessory that is always there to save you a lot of hassle and frustration．●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。

詳細を確認する

TOURATECH ツラーテック【ヴェルシス用】サイドスタンドエクステンション Kawasaki Versys 650

価格5198円

●メーカー品番：01-408-5275-0●適合付帯条件：カワサキ・Versys 650●備考：It’s a familiar problem that has tested the temper of many motorcyclists． After riding your bike along rocky， bumpy off-road tracks， you just want to stop for a rest． But that’s easier said than done． Parking your bike on soft ground can be a real problem！ Usually you can’t find a wooden board or something similar to stand the bike on when you need it．Touratech has the solution： the side stand base extension more than doubles the area of the supporting surface， so you won’t find yourself straining to lift the fully laden machine． A mix of stainless steel and black anodised aluminium components ensure the base extension looks good and provide full stability． Securely fixed to the side stand， the base extension is a useful accessory that is always there to save you a lot of hassle and frustration．●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。

詳細を確認する

SW-MOTECH エスダブリューモテック【ヴェルシス1000用】Kawasaki Versys 1000 センタースタンド

価格33144円

●メーカー品番：hps-08-144-10000-b●適合付帯条件：カワサキ・Versys1000●備考：Centerstand. Black.HPS.08.144.10000／B●SW-Motechについて：斬新なアイデアと独創的なデザインで、ヨーロッパのバイク業界で数々のヒット製品生み出しているドイツの新鋭パーツメーカー、SW-Motech（エスダブリュー・モテック）。SW-モテック製品の独創性は、ソケット式タンクバッグ、トップケース装着のアリュ・ラックそしてサイドケースホルダー装着のクイックロック・サイドケースホルダー、ミラーワイドナー等、すべての製品に画期的なアイデアが盛り込まれています。また、SUZUKIなどの一流メーカーに、長くOEM供給を続けてきた経験により醸成された高い技術力は、定評のある各種センタースタンド、クラッシュバーに発揮されています。●写真注意：※画像はイメージとなります。●納期：※在庫が有る場合は、5営業日以内（土日祝除く）に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【ヴェルシス用】TOURATECH ワイドステップ 「ワークス」 長距離用 Kawasaki Versys 650/1000

価格22695円

●メーカー品番：01-408-5315-0●適合付帯条件：カワサキ・Versys 650/1000●備考：Touratech WORKS stainless steel foot pegs． The best that Touratech has to offer for your boots． Specially developed to meet the specifications of the Touratech works racing team． The characteristic shape of the 52 mm wide and 4 mm thick stainless steel claw profile is kind to your boots and offers the perfect combination of grip and self-cleaning． The rounded edges prevent damage to the boot soles， the open design allows clay and stones in the tread to fall through the foot pegs， while the boot profile has a sure hold on the peg． The slender design and outward chamfering allow for better ground clearance， which is a great asset when riding along deep ruts compared to regular enduro foot pegs or standard products．The Touratech Works foot pegs have been specially strengthened at the mounting point， making them significantly less susceptible to impacts． The Works products are an optical highlight as well． Blasted stainless steel with a special laser inscription makes this product really stand out， as well as giving a visual indication of its noble origins in extreme enduro sport．- 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots- Perfect combination of grip and self-cleaning- With a more slender design for better ground clearance- Significantly less susceptible to impacts- Strengthened mounting point- With a blasted surface and laser inscription for a superior finish- German T＆＃65533；・V Type Approval ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【ヴェルシス用】TOURATECH ワイドステップ 「ワークス」 長距離用 Kawasaki Versys 650/1000

価格22695円

●メーカー品番：01-408-5315-0●適合付帯条件：カワサキ・Versys 650/1000●備考：Touratech WORKS stainless steel foot pegs． The best that Touratech has to offer for your boots． Specially developed to meet the specifications of the Touratech works racing team． The characteristic shape of the 52 mm wide and 4 mm thick stainless steel claw profile is kind to your boots and offers the perfect combination of grip and self-cleaning． The rounded edges prevent damage to the boot soles， the open design allows clay and stones in the tread to fall through the foot pegs， while the boot profile has a sure hold on the peg． The slender design and outward chamfering allow for better ground clearance， which is a great asset when riding along deep ruts compared to regular enduro foot pegs or standard products．The Touratech Works foot pegs have been specially strengthened at the mounting point， making them significantly less susceptible to impacts． The Works products are an optical highlight as well． Blasted stainless steel with a special laser inscription makes this product really stand out， as well as giving a visual indication of its noble origins in extreme enduro sport．- 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots- Perfect combination of grip and self-cleaning- With a more slender design for better ground clearance- Significantly less susceptible to impacts- Strengthened mounting point- With a blasted surface and laser inscription for a superior finish- German T＆＃65533；・V Type Approval ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

SW-MOTECH エスダブリューモテック【ヴェルシス1000用】Kawasaki Versys 1000 センタースタンド

価格33144円

●メーカー品番：hps-08-144-10000-b●適合付帯条件：カワサキ・Versys1000●備考：Centerstand. Black.HPS.08.144.10000／B●SW-Motechについて：斬新なアイデアと独創的なデザインで、ヨーロッパのバイク業界で数々のヒット製品生み出しているドイツの新鋭パーツメーカー、SW-Motech（エスダブリュー・モテック）。SW-モテック製品の独創性は、ソケット式タンクバッグ、トップケース装着のアリュ・ラックそしてサイドケースホルダー装着のクイックロック・サイドケースホルダー、ミラーワイドナー等、すべての製品に画期的なアイデアが盛り込まれています。また、SUZUKIなどの一流メーカーに、長くOEM供給を続けてきた経験により醸成された高い技術力は、定評のある各種センタースタンド、クラッシュバーに発揮されています。●写真注意：※画像はイメージとなります。●納期：※在庫が有る場合は、5営業日以内（土日祝除く）に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【ヴェルシス用】ピボットペグ 『Mark3』 Kawasaki Versys 650（2006-）

価格31564円

●メーカー品番：01-040-5512-0●適合付帯条件：カワサキ・Versys●備考：But the pegs are also extremely convenient in everyday riding． They provide a comfortable position of the rider’s feet on the pegs， which results in more relaxing riding． And thanks to the pivot movement， changing gears is easier and quicker．The new mega wide Mark 3 Pivot Pegz ？ 60mm WIDE！！An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs． Thanks to a spring joint， these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees． This protects the boot， and gives the Rider a better position on the bike - even in extreme situations． It also minimises the load on the rider， since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge． This is particularly Tiring， especially off-road．Facts： Better control： The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot．Less tiring： Better absorption of permanent impacts via the peg edges． Eliminates the risk of the boot slipping over the peg edge．Better cornering pressure： When cornering， the pressure on the motorbike develops over the full width of the peg and not just over the edges．More feeling： With PivotPegz， the pegs become a genuine connection between rider and machine． This prevents the rider from tiring， and makes his feeling for the motorbike more precise．Whether off-road， touring or on the road - PivotPegz are a definite plus in handling and comfort！ Complete set with all attachments． ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【ヴェルシス用】ピボットペグ 『Mark3』 Kawasaki Versys 650（2006-）

価格31564円

●メーカー品番：01-040-5512-0●適合付帯条件：カワサキ・Versys●備考：But the pegs are also extremely convenient in everyday riding． They provide a comfortable position of the rider’s feet on the pegs， which results in more relaxing riding． And thanks to the pivot movement， changing gears is easier and quicker．The new mega wide Mark 3 Pivot Pegz ？ 60mm WIDE！！An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs． Thanks to a spring joint， these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees． This protects the boot， and gives the Rider a better position on the bike - even in extreme situations． It also minimises the load on the rider， since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge． This is particularly Tiring， especially off-road．Facts： Better control： The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot．Less tiring： Better absorption of permanent impacts via the peg edges． Eliminates the risk of the boot slipping over the peg edge．Better cornering pressure： When cornering， the pressure on the motorbike develops over the full width of the peg and not just over the edges．More feeling： With PivotPegz， the pegs become a genuine connection between rider and machine． This prevents the rider from tiring， and makes his feeling for the motorbike more precise．Whether off-road， touring or on the road - PivotPegz are a definite plus in handling and comfort！ Complete set with all attachments． ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【ヴェルシス1000用】サイドスタンドエクステンション Kawasaki Versys 1000

価格5556円

●メーカー品番：01-407-5275-0●適合付帯条件：カワサキ・Versys 1000●備考：It’s a familiar problem that has tested the temper of many motorcyclists． After riding your bike along rocky， bumpy off-road tracks， you just want to stop for a rest． But that’s easier said than done． Parking your bike on soft ground can be a real problem！ Usually you can’t find a wooden board or something similar to stand the bike on when you need it．Touratech has the solution： the side stand base extension more than doubles the area of the supporting surface， so you won’t find yourself straining to lift the fully laden machine． A mix of stainless steel and black anodised aluminium components ensure the base extension looks good and provide full stability． Securely fixed to the side stand， the base extension is a useful accessory that is always there to save you a lot of hassle and frustration．●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。

詳細を確認する

TOURATECH ツラーテック【ヴェルシス1000用】サイドスタンドエクステンション Kawasaki Versys 1000

価格5556円

●メーカー品番：01-407-5275-0●適合付帯条件：カワサキ・Versys 1000●備考：It’s a familiar problem that has tested the temper of many motorcyclists． After riding your bike along rocky， bumpy off-road tracks， you just want to stop for a rest． But that’s easier said than done． Parking your bike on soft ground can be a real problem！ Usually you can’t find a wooden board or something similar to stand the bike on when you need it．Touratech has the solution： the side stand base extension more than doubles the area of the supporting surface， so you won’t find yourself straining to lift the fully laden machine． A mix of stainless steel and black anodised aluminium components ensure the base extension looks good and provide full stability． Securely fixed to the side stand， the base extension is a useful accessory that is always there to save you a lot of hassle and frustration．●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。

詳細を確認する

TOURATECH ツラーテック【ヴェルシス1000用】TOURATECH ワイドステップ 「ワークス」 長距離用 Kawasaki Versys 650/1000

価格22695円

●メーカー品番：01-408-5315-0●適合付帯条件：カワサキ・Versys 650/1000●備考：Touratech WORKS stainless steel foot pegs． The best that Touratech has to offer for your boots． Specially developed to meet the specifications of the Touratech works racing team． The characteristic shape of the 52 mm wide and 4 mm thick stainless steel claw profile is kind to your boots and offers the perfect combination of grip and self-cleaning． The rounded edges prevent damage to the boot soles， the open design allows clay and stones in the tread to fall through the foot pegs， while the boot profile has a sure hold on the peg． The slender design and outward chamfering allow for better ground clearance， which is a great asset when riding along deep ruts compared to regular enduro foot pegs or standard products．The Touratech Works foot pegs have been specially strengthened at the mounting point， making them significantly less susceptible to impacts． The Works products are an optical highlight as well． Blasted stainless steel with a special laser inscription makes this product really stand out， as well as giving a visual indication of its noble origins in extreme enduro sport．- 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots- Perfect combination of grip and self-cleaning- With a more slender design for better ground clearance- Significantly less susceptible to impacts- Strengthened mounting point- With a blasted surface and laser inscription for a superior finish- German T＆＃65533；・V Type Approval ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

SW-MOTECH エスダブリューモテック【ヴェルシス用】KAWASAKI ZRX1200S/R 01-06/Versys 07-用フットレストキット

価格19602円

●メーカー品番：frs-08-011-10000-s●適合付帯条件：2001-2006年（カワサキ・ZRX1200S/R）、2007年以降（カワサキ・Versys）●備考：SW−MOTECH Footrest Kit、■For mounting on the footrest holder■Made from corrosion resistant cast stainless steel with removable rubber pad■Big dimensioned contact area■Save against slipping because of profiled surface■Footrest link CNC−milled， made of extremely firm aluminium alloy■Adjustable in twdifferent positions （original position and 15 mm lower）■Made for offroad and touring■Included：2 footrests with link．Mounting material．Mounting instruction●写真注意：※画像はイメージとなります。●納期：※在庫が有る場合は、5営業日以内（土日祝除く）に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。

詳細を確認する

TOURATECH ツラーテック【ヴェルシス1000用】TOURATECH ワイドステップ 「ワークス」 長距離用 Kawasaki Versys 650/1000

価格22695円

●メーカー品番：01-408-5315-0●適合付帯条件：カワサキ・Versys 650/1000●備考：Touratech WORKS stainless steel foot pegs． The best that Touratech has to offer for your boots． Specially developed to meet the specifications of the Touratech works racing team． The characteristic shape of the 52 mm wide and 4 mm thick stainless steel claw profile is kind to your boots and offers the perfect combination of grip and self-cleaning． The rounded edges prevent damage to the boot soles， the open design allows clay and stones in the tread to fall through the foot pegs， while the boot profile has a sure hold on the peg． The slender design and outward chamfering allow for better ground clearance， which is a great asset when riding along deep ruts compared to regular enduro foot pegs or standard products．The Touratech Works foot pegs have been specially strengthened at the mounting point， making them significantly less susceptible to impacts． The Works products are an optical highlight as well． Blasted stainless steel with a special laser inscription makes this product really stand out， as well as giving a visual indication of its noble origins in extreme enduro sport．- 52 mm wide and 4 mm thick stainless steel claw profile that is kind to your boots- Perfect combination of grip and self-cleaning- With a more slender design for better ground clearance- Significantly less susceptible to impacts- Strengthened mounting point- With a blasted surface and laser inscription for a superior finish- German T＆＃65533；・V Type Approval ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

SW-MOTECH エスダブリューモテック【ヴェルシス用】KAWASAKI ZRX1200S/R 01-06/Versys 07-用フットレストキット

価格19602円

●メーカー品番：frs-08-011-10000-s●適合付帯条件：2001-2006年（カワサキ・ZRX1200S/R）、2007年以降（カワサキ・Versys）●備考：SW−MOTECH Footrest Kit、■For mounting on the footrest holder■Made from corrosion resistant cast stainless steel with removable rubber pad■Big dimensioned contact area■Save against slipping because of profiled surface■Footrest link CNC−milled， made of extremely firm aluminium alloy■Adjustable in twdifferent positions （original position and 15 mm lower）■Made for offroad and touring■Included：2 footrests with link．Mounting material．Mounting instruction●写真注意：※画像はイメージとなります。●納期：※在庫が有る場合は、5営業日以内（土日祝除く）に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。

詳細を確認する

ページ：TOP / 1 /