SW-MOTECH エスダブリューモテック【KLR650用】KAWASAKI KLR650用センタースタンド

価格24234円

●メーカー品番:hps-08-047-100●適合付帯条件:カワサキ・KLR650用●備考:KLR650対応のセンタースタンドです。94年から TYPE:KL650C ABE付き。●写真注意:※画像はイメージとなります。●納期:※在庫が有る場合は、5営業日以内(土日祝除く)に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLR650用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

SW-MOTECH エスダブリューモテック【KLR650用】KAWASAKI KLR650用センタースタンド

価格24234円

●メーカー品番:hps-08-047-100●適合付帯条件:カワサキ・KLR650用●備考:KLR650対応のセンタースタンドです。94年から TYPE:KL650C ABE付き。●写真注意:※画像はイメージとなります。●納期:※在庫が有る場合は、5営業日以内(土日祝除く)に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLR650用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

SW-MOTECH: KAWASAKI KLR650用センタースタンド【smtb-f】

価格23134円

KLR650対応のセンタースタンドです94年から TYPE:KL650C ABE付き※欠品の場合は納期1ヶ月以上お時間を頂く場合がございます。※受注後のキャンセル、返品、都合交換はできません。予めご了承ください。※お急ぎの場合は必ず事前に納期をご確認下さいませ。HPS.08.047.100オンロード、オフロードバイクパーツならSW-MOTECH

詳細を確認する

SW-MOTECH エスダブリューモテック【KLR650用】HONDA XL650V Transalp 00-/KAWASAKI KLR650 08-用フットレストキット

価格19602円

●メーカー品番:frs-08-011-10200-s●適合付帯条件:2000年以降(ホンダ・XL650V Transalp)、2008年以降(カワサキ・KLR650)●備考:SW−MOTECH Footrest Kit、■For mounting on the footrest holder■Made from corrosion resistant cast stainless steel with removable rubber pad■Big dimensioned contact area■Save against slipping because of profiled surface■Footrest link CNC−milled, made of extremely firm aluminium alloy■Adjustable in twdifferent positions (original position and 15 mm lower)■Made for offroad and touring■Included:2 footrests with link.Mounting material.Mounting instruction●写真注意:※画像はイメージとなります。●納期:※在庫が有る場合は、5営業日以内(土日祝除く)に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。

詳細を確認する

SW-MOTECH エスダブリューモテック【KLR650用】HONDA XL650V Transalp 00-/KAWASAKI KLR650 08-用フットレストキット

価格19602円

●メーカー品番:frs-08-011-10200-s●適合付帯条件:2000年以降(ホンダ・XL650V Transalp)、2008年以降(カワサキ・KLR650)●備考:SW−MOTECH Footrest Kit、■For mounting on the footrest holder■Made from corrosion resistant cast stainless steel with removable rubber pad■Big dimensioned contact area■Save against slipping because of profiled surface■Footrest link CNC−milled, made of extremely firm aluminium alloy■Adjustable in twdifferent positions (original position and 15 mm lower)■Made for offroad and touring■Included:2 footrests with link.Mounting material.Mounting instruction●写真注意:※画像はイメージとなります。●納期:※在庫が有る場合は、5営業日以内(土日祝除く)に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。

詳細を確認する

TOURATECH ツラーテック【KLE500用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLE250アネーロ用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLR250用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLE250アネーロ用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLE400用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLR250用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLE500用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテック【KLE400用】ピボットペグ 『Mark3』 Kawasaki KLR 650(1987-)

価格31564円

●メーカー品番:01-040-5513-0●適合付帯条件:カワサキ・KLE/KLR/KLV●備考:But the pegs are also extremely convenient in everyday riding. They provide a comfortable position of the rider’s feet on the pegs, which results in more relaxing riding. And thanks to the pivot movement, changing gears is easier and quicker.The new mega wide Mark 3 Pivot Pegz ? 60mm WIDE!!An absolute breakthrough - and not just for cross-country and enduro riders who bemoan the lack of sensitivity of the original pegs. Thanks to a spring joint, these foot pegs follow the forward and backward movements of the foot to an angle of 20 degrees. This protects the boot, and gives the Rider a better position on the bike - even in extreme situations. It also minimises the load on the rider, since the boot is almost always positioned on the full surface of the peg and not - as with the conventional peg - on the edge. This is particularly Tiring, especially off-road.Facts: Better control: The motorbike’s forces are always transmitted evenly via the same point to the sole of the boot.Less tiring: Better absorption of permanent impacts via the peg edges. Eliminates the risk of the boot slipping over the peg edge.Better cornering pressure: When cornering, the pressure on the motorbike develops over the full width of the peg and not just over the edges.More feeling: With PivotPegz, the pegs become a genuine connection between rider and machine. This prevents the rider from tiring, and makes his feeling for the motorbike more precise.Whether off-road, touring or on the road - PivotPegz are a definite plus in handling and comfort! Complete set with all attachments. ※本商品は現在、世界中からの需要に生産が間に合わずご注文後に一時バックオーダーとなるケースがございます。その場合、納期が数週間ほど延びる事もございますので、恐れ入りますがどうぞ予めご了承願います。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

SW-MOTECH エスダブリューモテック【トランザルプ600V用】HONDA XL650V Transalp 00-/KAWASAKI KLR650 08-用フットレストキット

価格19602円

●メーカー品番:frs-08-011-10200-s●適合付帯条件:2000年以降(ホンダ・XL650V Transalp)、2008年以降(カワサキ・KLR650)●備考:SW−MOTECH Footrest Kit、■For mounting on the footrest holder■Made from corrosion resistant cast stainless steel with removable rubber pad■Big dimensioned contact area■Save against slipping because of profiled surface■Footrest link CNC−milled, made of extremely firm aluminium alloy■Adjustable in twdifferent positions (original position and 15 mm lower)■Made for offroad and touring■Included:2 footrests with link.Mounting material.Mounting instruction●写真注意:※画像はイメージとなります。●納期:※在庫が有る場合は、5営業日以内(土日祝除く)に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。

詳細を確認する

SW-MOTECH エスダブリューモテック【トランザルプ600V用】HONDA XL650V Transalp 00-/KAWASAKI KLR650 08-用フットレストキット

価格19602円

●メーカー品番:frs-08-011-10200-s●適合付帯条件:2000年以降(ホンダ・XL650V Transalp)、2008年以降(カワサキ・KLR650)●備考:SW−MOTECH Footrest Kit、■For mounting on the footrest holder■Made from corrosion resistant cast stainless steel with removable rubber pad■Big dimensioned contact area■Save against slipping because of profiled surface■Footrest link CNC−milled, made of extremely firm aluminium alloy■Adjustable in twdifferent positions (original position and 15 mm lower)■Made for offroad and touring■Included:2 footrests with link.Mounting material.Mounting instruction●写真注意:※画像はイメージとなります。●納期:※在庫が有る場合は、5営業日以内(土日祝除く)に発送いたします。※取寄せの場合は、4〜5週間程度の納期が目安となります。また、予告無く生産を終了する場合がございますが、予めご了承ください。

詳細を確認する

ページ:TOP / 1 /