TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニアシステム 38+45L Triumph Tiger 800 XC

価格187546円

●メーカー品番:01-420-5737-0●適合車種:Triumph Tiger 800●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 107 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-black* 38 litres, with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro *And-black* 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックタンクバッグ 「Black Edition」 Triumph Tiger 800/ 800 XC(防水タイプ)

価格31046円

●メーカー品番:01-420-5803-0●適合車種:Triumph Tiger 800●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。We don’t want to deprive Tiger 800 owners from using our successful 『Black Edition』, which is why we are now offering the proven 『High End』 model in the popular black combination of materials!The use of PVC-coated polyester fabric, Teflon-coated Cordura and reflective panels assures not only an elegant look, but also the best qualities for everyday use and an exceptionally long life! Features: - Base plate adapted to the Triumph Tiger 800 for a perfect and secure fit even under extreme conditions- Easy to pack with a large cover and a 2-way zip- Waterproof zips used for the cover and both outer pockets- Ideally attached extra side pockets for small items that are needed quickly- Extra storage space with the reflective elastic cord pull on the back (e.g. for gloves)- Volume can be increased from 14 to 20 litres in seconds with the all-around zip- Attached to the motorbike with two push-fit fasteners at the front and a Velcro tab at the back; quickly detachable- The fastenings can stay on the motorbike, the rear Velcro tab serves as a tank pad- Comes with two side straps that provide extra safety for heavy loads- Large detachable map pocket (26 x 28 cm) with a Velcro fastener on the tank bag and a Velcro closure for easy access to the maps inside- Accompanying carry strap allows the bag to be used as a rucksack or shoulder bag- Sturdy synthetic handle for carrying things when the motorbike is left standing- Document case and loops for pens and a flashlight on the inside of the top cover and a detachable pouch for credit cards and small change- Integral reinforcing in the side wall keeps the bag in shapeMaterial: - Teflon-coated Cordura- PVC-coated polyester fabric- DuPont Teflon? fabric protectorSize: (L x W x H): approx. 30 x 30 x 16/25 cmCapacity: approx. 14/22 litresMade of Teflon-coated CORDURA, which is waterproof and dirt-resistant. Made in Germany by KAHEDO!●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックタンクバッグ 「Black Edition」 Triumph Tiger 800/ 800 XC(防水タイプ)

価格31046円

●メーカー品番:01-420-5803-0●適合車種:Triumph Tiger 800●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。We don’t want to deprive Tiger 800 owners from using our successful 『Black Edition』, which is why we are now offering the proven 『High End』 model in the popular black combination of materials!The use of PVC-coated polyester fabric, Teflon-coated Cordura and reflective panels assures not only an elegant look, but also the best qualities for everyday use and an exceptionally long life! Features: - Base plate adapted to the Triumph Tiger 800 for a perfect and secure fit even under extreme conditions- Easy to pack with a large cover and a 2-way zip- Waterproof zips used for the cover and both outer pockets- Ideally attached extra side pockets for small items that are needed quickly- Extra storage space with the reflective elastic cord pull on the back (e.g. for gloves)- Volume can be increased from 14 to 20 litres in seconds with the all-around zip- Attached to the motorbike with two push-fit fasteners at the front and a Velcro tab at the back; quickly detachable- The fastenings can stay on the motorbike, the rear Velcro tab serves as a tank pad- Comes with two side straps that provide extra safety for heavy loads- Large detachable map pocket (26 x 28 cm) with a Velcro fastener on the tank bag and a Velcro closure for easy access to the maps inside- Accompanying carry strap allows the bag to be used as a rucksack or shoulder bag- Sturdy synthetic handle for carrying things when the motorbike is left standing- Document case and loops for pens and a flashlight on the inside of the top cover and a detachable pouch for credit cards and small change- Integral reinforcing in the side wall keeps the bag in shapeMaterial: - Teflon-coated Cordura- PVC-coated polyester fabric- DuPont Teflon? fabric protectorSize: (L x W x H): approx. 30 x 30 x 16/25 cmCapacity: approx. 14/22 litresMade of Teflon-coated CORDURA, which is waterproof and dirt-resistant. Made in Germany by KAHEDO!●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニア・スペシャルキット 45+45L Triumph Tiger 800

価格237687円

●メーカー品番:01-420-5726-0●適合車種:Triumph Tiger 800●備考:The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres). The overall width of the 45 litres special system is 103 cm.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- with special stable luggage rack- ready fitted fixing kits- sturdy connecting bar- no exhaust extension necessary for original silencerWhat is special about the special set: the size and mounting symmetry. The set is only 103 cm wide when mounting two 45 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made. Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-S* 45 with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro *And-S* 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニア・スペシャルキット 45+45L Triumph Tiger 800

価格237687円

●メーカー品番:01-420-5726-0●適合車種:Triumph Tiger 800●備考:The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres). The overall width of the 45 litres special system is 103 cm.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- with special stable luggage rack- ready fitted fixing kits- sturdy connecting bar- no exhaust extension necessary for original silencerWhat is special about the special set: the size and mounting symmetry. The set is only 103 cm wide when mounting two 45 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made. Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-S* 45 with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro *And-S* 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックタンクバッグ Yamaha XT660R/Triumph Tiger 800/BMW HP2

価格21920円

●メーカー品番:01-055-1130-0●適合車種:YAMAHA XT660R●備考:The XT 660 R tank bag is perfectly adapted to the tank’s shape. Its capacity can be further expanded with a zip. Additional rubber strap on the right is to hold your gloves. The small map case is fixed to the tank bag with Velcro and can be removed easily.The tank bag can be removed in seconds so that you can access the tank quickly. As always, it can also be converted into a backpack using the supplied straps. The tank bag also features a plastic handle. Colours: black, grey with sewn inreinforced reflective strips/cords.Dimensions (LxWxH): approx. 29x24x17/25 cmCapacity: approx. 12/17.5 litres01-055-1130-0●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックタンクバッグ Yamaha XT660R/Triumph Tiger 800/BMW HP2

価格21920円

●メーカー品番:01-055-1130-0●適合車種:YAMAHA XT660R●備考:The XT 660 R tank bag is perfectly adapted to the tank’s shape. Its capacity can be further expanded with a zip. Additional rubber strap on the right is to hold your gloves. The small map case is fixed to the tank bag with Velcro and can be removed easily.The tank bag can be removed in seconds so that you can access the tank quickly. As always, it can also be converted into a backpack using the supplied straps. The tank bag also features a plastic handle. Colours: black, grey with sewn inreinforced reflective strips/cords.Dimensions (LxWxH): approx. 29x24x17/25 cmCapacity: approx. 12/17.5 litres01-055-1130-0●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「and-S」 アルミニウムパニア・スペシャルキット 38+38L Triumph Tiger 800

価格237687円

●メーカー品番:01-420-5716-0●適合車種:Triumph Tiger 800●備考:The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres). The overall width of the 38 litres special system is 95 cm. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- with special stable luggage rack- ready fitted fixing kits- sturdy connecting bar- no exhaust extension necessary for original silencerWhat is special about the special set: the size and mounting symmetry. The set is only 95 cm wide when mounting two 38 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made.Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-S* 38 with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro *And-S* 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニア・スペシャルキット 38+38L Triumph Tiger 800

価格222189円

●メーカー品番:01-420-5715-0●適合車種:Triumph Tiger 800●備考:The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres).The overall width of the 38 litres special system is 95 cm. - with special stable luggage rack.- ready fitted fixing kits.- sturdy connecting bar.- no exhaust extension necessary for original silencer.What is special about the special set: the size and mounting symmetry. The set is only 95 cm wide when mounting two 38 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made. In addition, the set includes a pipe extension and two mini indicators. Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 45 with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニアシステム 38+45L Triumph Tiger 800 XC

価格165161円

●メーカー品番:01-420-5735-0●適合車種:Triumph Tiger 800●備考:The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 107 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニアシステム 38+45L Triumph Tiger 800 XC

価格165161円

●メーカー品番:01-420-5735-0●適合車種:Triumph Tiger 800●備考:The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 107 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニア・スペシャルキット 45+45L Triumph Tiger 800

価格222189円

●メーカー品番:01-420-5725-0●適合車種:Triumph Tiger 800●備考:The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres). The overall width of the 45 litres special system is 103 cm. - with special stable luggage rack- ready fitted fixing kits- sturdy connecting bar- no exhaust extension necessary for original silencerWhat is special about the special set: the size and mounting symmetry. The set is only 103 cm wide when mounting two 45 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made.Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 45 with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニア・スペシャルキット 45+45L Triumph Tiger 800

価格222189円

●メーカー品番:01-420-5725-0●適合車種:Triumph Tiger 800●備考:The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres). The overall width of the 45 litres special system is 103 cm. - with special stable luggage rack- ready fitted fixing kits- sturdy connecting bar- no exhaust extension necessary for original silencerWhat is special about the special set: the size and mounting symmetry. The set is only 103 cm wide when mounting two 45 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made.Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 45 with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 38+45L Triumph Tiger 800/800XC(ブラックフレーム)

価格167915円

●メーカー品番:01-420-6085-0●適合車種:Triumph Tiger 800/800XC●備考:The next step in evolution After ZEGA and ZEGA Pro, we have now developed the ZEGA Pro2. Based on the ZEGA Pro, its excellent properties have all been retained, but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation. Above all, though, the pre-assembled version is an absolute revolution! It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use, facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers! There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click - and go! The innovative construction in resilient stainless steel releases the catch before attachment, which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers: - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting: - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 109 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system: 1 x aluminium pannier ZEGA Pro2 38 litres 1 x aluminium pannier ZEGA Pro2 45 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 アルミニウムパニア・スペシャルキット 38+38L Triumph Tiger 800

価格243886円

●メーカー品番:01-420-5717-0●適合車種:Triumph Tiger 800●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres). The overall width of the 38 litres special system is 95 cm. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- with special stable luggage rack- ready fitted fixing kits- sturdy connecting bar- no exhaust extension necessary for original silencerWhat is special about the special set: the size and mounting symmetry. The set is only 95 cm wide when mounting two 38 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made. Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-Black* 38 with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro *And-Black* 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 38+45L Triumph Tiger 800/800XC(ブラックフレーム)

価格167915円

●メーカー品番:01-420-6085-0●適合車種:Triumph Tiger 800/800XC●備考:The next step in evolution After ZEGA and ZEGA Pro, we have now developed the ZEGA Pro2. Based on the ZEGA Pro, its excellent properties have all been retained, but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation. Above all, though, the pre-assembled version is an absolute revolution! It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use, facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers! There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click - and go! The innovative construction in resilient stainless steel releases the catch before attachment, which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers: - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting: - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 109 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system: 1 x aluminium pannier ZEGA Pro2 38 litres 1 x aluminium pannier ZEGA Pro2 45 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニア・スペシャルキット 38+38L Triumph Tiger 800

価格222189円

●メーカー品番:01-420-5715-0●適合車種:Triumph Tiger 800●備考:The box has a gap for the silencer (as a result the capacity is reduced by approx. 5 litres).The overall width of the 38 litres special system is 95 cm. - with special stable luggage rack.- ready fitted fixing kits.- sturdy connecting bar.- no exhaust extension necessary for original silencer.What is special about the special set: the size and mounting symmetry. The set is only 95 cm wide when mounting two 38 litre panniers. To achieve this, one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made. In addition, the set includes a pipe extension and two mini indicators. Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 45 with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 38+45L Triumph Tiger 800/800XC(シルバーフレーム)

価格167915円

●メーカー品番:01-420-6035-0●適合車種:Triumph Tiger 800/800XC●備考:The next step in evolution After ZEGA and ZEGA Pro, we have now developed the ZEGA Pro2. Based on the ZEGA Pro, its excellent properties have all been retained, but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation. Above all, though, the pre-assembled version is an absolute revolution! It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use, facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers! There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click - and go! The innovative construction in resilient stainless steel releases the catch before attachment, which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers: - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting: - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 109 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system: 1 x aluminium pannier ZEGA Pro2 38 litres 1 x aluminium pannier ZEGA Pro2 45 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 アルミニウムパニアシステム 38+45L Triumph Tiger 800/800XC(シルバーフレーム)

価格167915円

●メーカー品番:01-420-6035-0●適合車種:Triumph Tiger 800/800XC●備考:The next step in evolution After ZEGA and ZEGA Pro, we have now developed the ZEGA Pro2. Based on the ZEGA Pro, its excellent properties have all been retained, but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation. Above all, though, the pre-assembled version is an absolute revolution! It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use, facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers! There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on, click - and go! The innovative construction in resilient stainless steel releases the catch before attachment, which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers: - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting: - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 109 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system: 1 x aluminium pannier ZEGA Pro2 38 litres 1 x aluminium pannier ZEGA Pro2 45 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「and-S」 アルミニウムパニアシステム 38+38L Triumph Tiger 800 XC

価格181089円

●メーカー品番:01-420-5731-0●適合車種:Triumph Tiger 800●備考:The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- overall width: 99 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-S* 31 litres, with pre-fitted 18 mm fixing kit1 aluminium pannier Zega Pro *And-S* 38 litres, with pre-fitted 18 mm fixing kit1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO アルミニウムパニアシステム 31+38L Triumph Tiger 800/800XC(ブラックフレーム)

価格165161円

●メーカー品番:01-420-5780-0●適合車種:Triumph・Tiger 800●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 99 cm- Stainless steel rack, black powder coated Pannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 31 litres, with pre-fitted 18 mm fixing kit1 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO アルミニウムパニアシステム 31+38L Triumph Tiger 800/800XC(ブラックフレーム)

価格165161円

●メーカー品番:01-420-5780-0●適合車種:Triumph・Tiger 800●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 99 cm- Stainless steel rack, black powder coated Pannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 31 litres, with pre-fitted 18 mm fixing kit1 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニアシステム 31+38L Triumph Tiger 800 XC

価格165161円

●メーカー品番:01-420-5730-0●適合車種:Triumph Tiger 800●備考:The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 99 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 31 litres, with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PROアルミニウムパニアシステム 31+38L Triumph Tiger 800 XC

価格165161円

●メーカー品番:01-420-5730-0●適合車種:Triumph Tiger 800●備考:The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 99 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro 31 litres, with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「and-S」 アルミニウムパニアシステム 38+45L Triumph Tiger 800 XC

価格181089円

●メーカー品番:01-420-5736-0●適合車種:Triumph Tiger 800●備考:The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 107 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-S* 38 litres, with pre-fitted 18 mm fixing kit1 aluminium pannier Zega Pro *And-S* 45 litres, with pre-fitted 18 mm fixing kit1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「and-S」 アルミニウムパニアシステム 38+45L Triumph Tiger 800 XC

価格181089円

●メーカー品番:01-420-5736-0●適合車種:Triumph Tiger 800●備考:The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 107 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium! The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate. The advantages at a glance: - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-S* 38 litres, with pre-fitted 18 mm fixing kit1 aluminium pannier Zega Pro *And-S* 45 litres, with pre-fitted 18 mm fixing kit1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

【トライアンフ TIGER800 [タイガー]】 SARGENT EUレギュラーフロント&リアワールドスポーツパフォーマンスプラスシート カラー:G-058/サファイアブルー

価格72360円

■商品番号WS-617-SE■商品概要パイピング:カスタム【素材】シート表皮:デュラテックスリム表皮:レザールックカラー:G-058/サファイアブルー■適合車種▼TRIUMPHTIGER800 [タイガー] TIGER800 [タイガー] XC ■詳細説明長時間の利用にも臀部が痛くならない低反発素材を内部に使用。また、使用するにつれ、形状がお客様の臀部にフィットするようになっています。商品は手作りの受注生産品です。■注意点※手作り生産の為、完全受注生産品となります。本国(米国)への発注のため、納期には1-2ヶ月ほどお時間を頂きます。予めご了承ください。※純正シートを送って頂く必要はございません。※取扱い説明書はすべて英語・その他外国語です。あらかじめご了承ください。

詳細を確認する

2輪 ヘプコ&ベッカー サイドケースホルダー 品番:6507505-0001 ブラック スチール トライアンフ タイガー800 JAN:4548664511594

価格37476円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 プロト PLOT HEPCO&BECKER TIGER 車体関連&アクセサリー TRIUMPH ぷろと バッグ タンク ケース積載重量:(ケース重量含む)片側10.0kg色[カラー]:ブラック加工[有/無]:取り付けには多少の加工が必要な場合がございます材質[素材]:スチール適合:Tiger800/XC[N]WEB結合品名:ヘプコアンドベッカー スチール ブラック ツーリング&キャンプ商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 ヘプコ&ベッカー サイドケースホルダー 品番:6507505-0001 ブラック スチール トライアンフ タイガー800 JAN:4548664511594

価格37476円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 プロト PLOT HEPCO&BECKER TIGER 車体関連&アクセサリー TRIUMPH ぷろと バッグ タンク ケース積載重量:(ケース重量含む)片側10.0kg色[カラー]:ブラック加工[有/無]:取り付けには多少の加工が必要な場合がございます材質[素材]:スチール適合:Tiger800/XC[N]WEB結合品名:ヘプコアンドベッカー スチール ブラック ツーリング&キャンプ商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31+38L Triumph Tiger 800/800XC(ブラックフレーム)

価格181089円

●メーカー品番:01-420-5781-0●適合車種:Triumph・Tiger 800●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 99 cm- Stainless steel rack, black powder coatedPannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 aluminium pannier Zega Pro *And-S* 31 litres, with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro *And-S* 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

ページ:TOP / 1 /2 /3 /