TOURATECH ツラーテックZEGA-PROアルミニウムパニア・スペシャルキット 38＋38L Triumph Tiger 800

価格222189円

●メーカー品番：01-420-5715-0●適合車種：Triumph Tiger 800●備考：The box has a gap for the silencer （as a result the capacity is reduced by approx. 5 litres）.The overall width of the 38 litres special system is 95 cm. - with special stable luggage rack.- ready fitted fixing kits.- sturdy connecting bar.- no exhaust extension necessary for original silencer.What is special about the special set： the size and mounting symmetry. The set is only 95 cm wide when mounting two 38 litre panniers. To achieve this， one pannier features a cut out to accommodate the exhaust pipe. The rack is custom- made. In addition， the set includes a pipe extension and two mini indicators. Pannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy， the case is available in a 38／38 litre version， made entirely of 1.5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！ The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus， for instance， a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate. The advantages at a glance： - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system：2 aluminium pannier Zega Pro 45 with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware『Not to be used in conjunction with Rapid Trap』※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

デイトナ 75025 GIVI ジビ タンクロック BF02 イージーロック トライアンフ Street Triple675/1050 Tiger1050 デイトナ 75025

価格1539円

商品内容 商品名 デイトナ 75025 GIVI BF02 イージーロック トライアンフ 4909449394625 状態 新品未使用 内容 タンクロックバッグ装着に必要！ 車種別イージーロック！※車種によっては、 タンクキャップが全開しない場合が御座いますが、使用上問題無く給油する事ができます。 ※車種によっては、ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックする事はできます。商品の詳細な情報については、メーカーサイト（www.daytona.co.jp/）でご確認ください。 ご注意 人気商品に付き稀に在庫を切らす事があります。お急ぎの方は必ず,在庫の確認をお願いします。一部の商品はメーカー取り寄せ商品も御座います。ご注文確定後のキャンセル、返品及び交換不可。お使いのPCや携帯電話などの環境により画像の商品と若干の色目が異なる事があります。ご了承ください。 配送方法 佐川急便のみ対応しております。一部離島等はこちらの都合で日本郵便で発送する場合も御座います。　

詳細を確認する

2輪 ヘプコ＆ベッカー サイドケースホルダー 品番：6507505-0001 ブラック スチール トライアンフ タイガー800 JAN：4548664511594

価格37476円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 プロト PLOT HEPCO＆BECKER TIGER 車体関連＆アクセサリー TRIUMPH ぷろと バッグ タンク ケース積載重量：（ケース重量含む）片側10.0kg色[カラー]：ブラック加工[有/無]：取り付けには多少の加工が必要な場合がございます材質[素材]：スチール適合：Tiger800/XC[N]WEB結合品名：ヘプコアンドベッカー スチール ブラック ツーリング＆キャンプ商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 デイトナ GIVI イージーロック BF02 品番：75025 JAN：4909449394625 トライアンフ タイガー1050 2007年〜2012年

価格2052円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 DAYTONA ジビ タンクロック ツーリング TRIUMPH でいとな※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際に、タンクバッグとハンドルが接触する場合があります。※構造上、タンクバッグの高さが磁石式の物等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 デイトナ GIVI イージーロック BF02 品番：75025 JAN：4909449394625 トライアンフ タイガー1050 2007年〜2012年

価格2052円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 DAYTONA ジビ タンクロック ツーリング TRIUMPH でいとな※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際に、タンクバッグとハンドルが接触する場合があります。※構造上、タンクバッグの高さが磁石式の物等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

2輪 ヘプコ＆ベッカー サイドケースホルダー 品番：6507505-0001 ブラック スチール トライアンフ タイガー800 JAN：4548664511594

価格37476円

motorcycle motorbike autobicycle バイク モーターバイク モーターサイクル モーター サイクル オートバイ 2輪車 二輪 二輪車 プロト PLOT HEPCO＆BECKER TIGER 車体関連＆アクセサリー TRIUMPH ぷろと バッグ タンク ケース積載重量：（ケース重量含む）片側10.0kg色[カラー]：ブラック加工[有/無]：取り付けには多少の加工が必要な場合がございます材質[素材]：スチール適合：Tiger800/XC[N]WEB結合品名：ヘプコアンドベッカー スチール ブラック ツーリング＆キャンプ商品の詳細な情報については、メーカーサイトでご確認ください。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（ブラックフレーム）

価格181089円

●メーカー品番：01-420-5781-0●適合車種：Triumph・Tiger 800●備考：The aluminium pannier system again has a very robust construction．We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle．Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands．The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces．The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width： 99 cm- Stainless steel rack， black powder coatedPannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity．Mounting easy to fit．Uses standard mounting points．No modifications to rear footrests．Mounting bolts are included．Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro．Light and yet sturdy， the case is available in a 38／45 litre version， made entirely of 1．5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）．You’ll find no leaky welded seams along the edges．High quality silicone seals ensure that the contents of this case are protected as well as possible．The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall．The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges．The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye．Thus， for instance， a clever handle can be added to the lid．The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat．Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories．The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate．The advantages at a glance：- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs．Delivery schedule of the system：1 aluminium pannier Zega Pro ＊And-S＊ 31 litres， with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro ＊And-S＊ 38 litres， with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意：※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（ブラックフレーム）

価格181089円

●メーカー品番：01-420-5781-0●適合車種：Triumph・Tiger 800●備考：The aluminium pannier system again has a very robust construction．We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle．Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands．The rack is made of 18 mm stainless steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces．The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case．The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration．- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width： 99 cm- Stainless steel rack， black powder coatedPannier system Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall．Bolted crosspiece for better rigidity．Mounting easy to fit．Uses standard mounting points．No modifications to rear footrests．Mounting bolts are included．Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro．Light and yet sturdy， the case is available in a 38／45 litre version， made entirely of 1．5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）．You’ll find no leaky welded seams along the edges．High quality silicone seals ensure that the contents of this case are protected as well as possible．The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall．The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges．The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye．Thus， for instance， a clever handle can be added to the lid．The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat．Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories．The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate．The advantages at a glance：- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs．Delivery schedule of the system：1 aluminium pannier Zega Pro ＊And-S＊ 31 litres， with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro ＊And-S＊ 38 litres， with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意：※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-black」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（シルバーフレーム）

価格189698円

●メーカー品番：01-420-6032-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-Black」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-Black」 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-S」 アルミニウムパニアシステム 38＋45L Triumph Tiger 800/800XC（ブラックフレーム）

価格183413円

●メーカー品番：01-420-6086-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 109 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-S」 38 litres 1 x aluminium pannier ZEGA Pro2 「And-S」 45 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-S」 アルミニウムパニアシステム 38＋45L Triumph Tiger 800/800XC（ブラックフレーム）

価格183413円

●メーカー品番：01-420-6086-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 109 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-S」 38 litres 1 x aluminium pannier ZEGA Pro2 「And-S」 45 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-black」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（シルバーフレーム）

価格189698円

●メーカー品番：01-420-6032-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-Black」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-Black」 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-S」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（ブラックフレーム）

価格183413円

●メーカー品番：01-420-6081-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-S」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-S」 38 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-S」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（ブラックフレーム）

価格183413円

●メーカー品番：01-420-6081-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-S」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-S」 38 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-S」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（シルバーフレーム）

価格183413円

●メーカー品番：01-420-6031-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-S」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-S」 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-S」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（シルバーフレーム）

価格183413円

●メーカー品番：01-420-6031-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-S」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-S」 38 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 パニアシステム 31＋38L Triumph Tiger 1050i 【組付必要】 「STREETLINE」

価格168087円

●メーカー品番：01-615-0610-0●適合車種：Triumph Tiger 1050i●備考：■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責（保証対象外）とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- overall width： 95 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy， the case is available in a 31／38 litre version， made entirely of 1.5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！ The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）. You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus， for instance， a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate. The advantages at a glance： - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs.Supplied with：1 pannier rack with attachment materials1 ZEGA PRO ＊AND-black＊ panniers， 31 litre1 ZEGA PRO ＊AND-black＊ panniers， 38 litre※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 パニアシステム 45＋38L Triumph Tiger 1050i 【組付必要】 「STREETLINE」

価格168260円

●メーカー品番：01-615-0620-0●適合車種：Triumph Tiger 1050i●備考：■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責（保証対象外）とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width： 103 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy， the case is available in a 38／45 litre version， made entirely of 1.5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！ The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）. You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus， for instance， a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate. The advantages at a glance： - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system：1 aluminium pannier Zega Pro ＊And-Black＊ 38 litres， with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro ＊And-Black＊ 45 litres， with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 パニアシステム 31＋38L Triumph Tiger 1050i 【組付必要】 「STREETLINE」

価格168087円

●メーカー品番：01-615-0610-0●適合車種：Triumph Tiger 1050i●備考：■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責（保証対象外）とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- overall width： 95 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy， the case is available in a 31／38 litre version， made entirely of 1.5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！ The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）. You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus， for instance， a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate. The advantages at a glance： - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs.Supplied with：1 pannier rack with attachment materials1 ZEGA PRO ＊AND-black＊ panniers， 31 litre1 ZEGA PRO ＊AND-black＊ panniers， 38 litre※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 パニアシステム 45＋38L Triumph Tiger 1050i 【組付必要】 「STREETLINE」

価格168260円

●メーカー品番：01-615-0620-0●適合車種：Triumph Tiger 1050i●備考：■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責（保証対象外）とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands. The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces. The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width： 103 cm- Stainless steel rackPannier systemRobust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction， our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy， the case is available in a 38／45 litre version， made entirely of 1.5-mm aluminium， water- and dust-proof， and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium！ The lid and base of the ZEGA Pro are welded， which achieves the maximum rigidity of the connections， and the base and outer shell have high quality rivets （no cheap studs for us - or you！）. You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on， and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid， which comes off completely or can be opened just from one side - the catches double as hinges. The ZEGA Pro appeals not only for its technology and workmanship， but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus， for instance， a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case， so it also makes an ideal seat. Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system， which is strong and reliable yet easy to operate. The advantages at a glance： - automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge； also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system：1 aluminium pannier Zega Pro ＊And-Black＊ 38 litres， with pre-fitted 18 mm fixing kit 1 aluminium pannier Zega Pro ＊And-Black＊ 45 litres， with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意：※画像はイメージです。●納期：メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-black」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（ブラックフレーム）

価格189698円

●メーカー品番：01-420-6082-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-Black」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-Black」 38 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-black」 アルミニウムパニアシステム 31＋38L Triumph Tiger 800/800XC（ブラックフレーム）

価格189698円

●メーカー品番：01-420-6082-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 101 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-Black」 31 litres 1 x aluminium pannier ZEGA Pro2 「And-Black」 38 litres 1 x pannier rack black including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO2 「And-black」 アルミニウムパニアシステム 38＋45L Triumph Tiger 800/800XC（シルバーフレーム）

価格189698円

●メーカー品番：01-420-6037-0●適合車種：Triumph Tiger 800/800XC●備考：The next step in evolution After ZEGA and ZEGA Pro， we have now developed the ZEGA Pro2. Based on the ZEGA Pro， its excellent properties have all been retained， but many details have also been significantly improved. The ZEGA Pro2 shines with its improved profile for even better operation， a carrying handle as standard and optimised ventilation. Above all， though， the pre-assembled version is an absolute revolution！ It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use， facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers！ There’s a single lever on the outside to operate the mechanism. The lid can stay closed when it is removed from the bike. Pannier on， click - and go！ The innovative construction in resilient stainless steel releases the catch before attachment， which means the ZEGA Pro2 can also cope with extreme loads. The supports for the ZEGA Pro2 accessories holder are also standard fittings on the pre-assembled ZEGA Pro2 on both sides of each pannier. They are automatically locked when the lid is closed. Panniers： - improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard， lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences， e.g. after going through a tunnel - including all the benefits of the award-winning ZEGA Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes （31， 38， 45 litres） and 3 finishes （natural aluminium， anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look， but also prevents rubbing inside the case. The ultra thick， high quality anodised layer offers very special protection for the surface and helps to prevent discoloration. Mounting： - Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches， in a protected position between the pannier and seat - including pre-assembled supports for all ZEGA Pro2 accessory holders on both sides of a pannier. The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system. ZEGA Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances. Pannier frame - Stainless steel rack - sturdy connecting bar - overall width： 109 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included. Delivery schedule of the system： 1 x aluminium pannier ZEGA Pro2 「And-Black」 38 litres 1 x aluminium pannier ZEGA Pro2 「And-Black」 45 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for ZEGA Pro2 release catches with 2 simultaneous locking （01-050-3300-0）●写真注意：※画像はイメージです。●納期：※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

ページ：TOP / 1 /2 /3 /4 /5 /6 /