TOURATECH ツラーテックZEGA-PRO「And-black」アルミニウムパニアシステム 45+45L Honda Varadero(-2006)/ブラックフレーム

価格208154円

●メーカー品番:01-052-3556-0●適合車種:HONDA・Varadero(-2006)●備考:■ブラックアルマイト仕様につきまして■ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 110 cm Pannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-black」アルミニウムパニアシステム 45+45L Honda Varadero(-2006)/ブラックフレーム

価格208154円

●メーカー品番:01-052-3556-0●適合車種:HONDA・Varadero(-2006)●備考:■ブラックアルマイト仕様につきまして■ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 110 cm Pannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 45/45 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 45 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-black」パニアシステム 31+31L Honda CBF1000(シルバーフレーム)

価格182553円

●メーカー品番:01-618-0052-0●適合車種:HONDA・CBF1000/F●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 91 cm- Stainless steel rackPannier system Robust stainless steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof,and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections,and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design- the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro And-Black 31 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

DAYTONA[デイトナ]:GIVI 「XS308 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79082】

価格18112円

商品説明★☆セット商品☆★GIVI 「XS308 タンクロック」と車種専用「イージーロック アタッチメント」を合わせた、車種専用SET。<GIVI XS308 タンクロック>ツーリングを知り尽くしたGIVIだからご提案できる、イタリアンデザインの多機能ソフトバッグ。脱着は簡単で、装着はバッグをロックにはめ込むだけでロックができ、取り外しはバッグ下のレバーを引くだけでロックが解除されます。--詳細--○サイズ:縦350×横280×高さ200→300mm○容量:20L○マップ面:A5程度の地図が入ります(ブックタイプは入りません。)○脱着式タブレットホルダー付き(外側からスワイプ操作可能)○側面ポーチ脱着式○容量可変○レインカバー・ショルダーベルト付属○南京錠対応<GIVI イージーロック タンクバック取付アタッチメント>GIVIタンクロックシステム専用、車種別アタッチメント「イージーロック 」。タンクロックシリースのバッグ装着時に必要となる、車種専用のアタッチメント。仕様・規格■メーカー■・DAYTONA[デイトナ]■メーカー品番■・92600-79082■JANコード■・4909449438022■適合車種■<HONDA>・Honda Crosstourer 1200(14年)▲注意点▲※車種によってはタンクキャップが全開しない場合がございますが、使用上問題なく給油することができます。※ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックすることはできます。.incident{width:700px;}.incident a, .incident img {border:none;text-align:center;margin:0 ;}.incident ul {margin:0;padding:0;list-style:none;}.incident ul li {float: left;width: 210px;height: 200px;overflow: hidden;padding: 0 18px 10px 0;}.incident ul li.last {padding:0 0 10px 0;}.incident ul li p {font-size:75%;margin:0;padding:10px;color:#1D54A7;line-height:1.5;}DAYTONA[デイトナ]:GIVI 「3D603 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79493】DAYTONA[デイトナ]:GIVI 「3D604 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-91051】DAYTONA[デイトナ]:GIVI 「XS306 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79080】DAYTONA[デイトナ]:GIVI 「XS307 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79081】DAYTONA[デイトナ]:GIVI イージーロック タンクバック取付アタッチメント(BF20)/Honda Crosstourer 1200(14) 【92600】DAYTONA[デイトナ]:GIVI XS308 タンクロック XSTREAM 【79082】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31+38L Honda AfricaTwin RD-07(ブラックフレーム)

価格184446円

●メーカー品番:01-052-3543-0●適合車種:HONDA・Africa Twin●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- overall width: 97 cm Pannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 x aluminium pannier Zega Pro 31 litres 1 x aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 x pannier rack including mounting hardware 2 x 21 Watt mini indicators original indicators can’t be re-used●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-S」アルミニウムパニアシステム 31+38L Honda AfricaTwin RD-07(ブラックフレーム)

価格184446円

●メーカー品番:01-052-3543-0●適合車種:HONDA・Africa Twin●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- overall width: 97 cm Pannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 x aluminium pannier Zega Pro 31 litres 1 x aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 x pannier rack including mounting hardware 2 x 21 Watt mini indicators original indicators can’t be re-used●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「and-S」パニアシステム 31+31L Honda CBF1000(シルバーフレーム)

価格177904円

●メーカー品番:01-618-0051-0●適合車種:HONDA・CBF1000/F●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 91 cm- Stainless steel rackPannier system Robust stainless steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof,and manufactured to the highest standards- no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design- the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro And-S 31 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-black」アルミニウムパニアシステム 31+38L Honda AfricaTwin RD-07(ブラックフレーム)

価格191334円

●メーカー品番:01-052-3545-0●適合車種:HONDA・Africa Twin●備考:■ブラックアルマイト仕様につきまして■ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- overall width: 97 cmPannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 x aluminium pannier Zega Pro 31 litres 1 x aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 x pannier rack including mounting hardware 2 x 21 Watt mini indicators original indicators can’t be re-used●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-black」アルミニウムパニアシステム 31+38L Honda AfricaTwin RD-07(ブラックフレーム)

価格191334円

●メーカー品番:01-052-3545-0●適合車種:HONDA・Africa Twin●備考:■ブラックアルマイト仕様につきまして■ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- overall width: 97 cmPannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:1 x aluminium pannier Zega Pro 31 litres 1 x aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 x pannier rack including mounting hardware 2 x 21 Watt mini indicators original indicators can’t be re-used●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-black」パニアシステム 31+31L Honda CBF1000(シルバーフレーム)

価格182553円

●メーカー品番:01-618-0052-0●適合車種:HONDA・CBF1000/F●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 91 cm- Stainless steel rackPannier system Robust stainless steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof,and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections,and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design- the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro And-Black 31 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-black」アルミニウムパニアシステム 38+38L Honda Varadero(-2006)/ブラックフレーム

価格205571円

●メーカー品番:01-052-3555-0●適合車種:HONDA・Varadero(-2006)●備考:■ブラックアルマイト仕様につきまして■ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 102 cm Pannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「And-black」アルミニウムパニアシステム 38+38L Honda Varadero(-2006)/ブラックフレーム

価格205571円

●メーカー品番:01-052-3555-0●適合車種:HONDA・Varadero(-2006)●備考:■ブラックアルマイト仕様につきまして■ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 102 cm Pannier system Robust steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity.Black plastic coated.Mounting easy to fit.Uses standard mounting points.No modifications to rear footrests.Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 38/38 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges.High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye.Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 38 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●ご注意:※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

DAYTONA[デイトナ]:GIVI 「XS307 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79081】

価格15584円

商品説明★☆セット商品☆★GIVI 「XS307 タンクロック」と車種専用「イージーロック アタッチメント」を合わせた、車種専用SET。<GIVI XS307 タンクロック>ツーリングを知り尽くしたGIVIだからご提案できる、イタリアンデザインの多機能ソフトバッグ。脱着は簡単で、装着はバッグをロックにはめ込むだけでロックができ、取り外しはバッグ下のレバーを引くだけでロックが解除されます。--詳細--○サイズ:縦350×横270×高さ180→210mm○容量:15L○マップ面:A5程度の地図が入ります(ブックタイプは入りません。)○脱着式タブレットホルダー付き(外側からスワイプ操作可能)○容量可変○レインカバー・ショルダーベルト付属○南京錠対応<GIVI イージーロック タンクバック取付アタッチメント>GIVIタンクロックシステム専用、車種別アタッチメント「イージーロック 」。タンクロックシリースのバッグ装着時に必要となる、車種専用のアタッチメント。仕様・規格■メーカー■・DAYTONA[デイトナ]■メーカー品番■・92600-79081■JANコード■・4909449438046■適合車種■<HONDA>・Honda Crosstourer 1200(14年)▲注意点▲※車種によってはタンクキャップが全開しない場合がございますが、使用上問題なく給油することができます。※ハンドルロックをする際に、タンクバッグとハンドルが接触する場合がありますがロックすることはできます。.incident{width:700px;}.incident a, .incident img {border:none;text-align:center;margin:0 ;}.incident ul {margin:0;padding:0;list-style:none;}.incident ul li {float: left;width: 210px;height: 200px;overflow: hidden;padding: 0 18px 10px 0;}.incident ul li.last {padding:0 0 10px 0;}.incident ul li p {font-size:75%;margin:0;padding:10px;color:#1D54A7;line-height:1.5;}DAYTONA[デイトナ]:GIVI 「3D603 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79493】DAYTONA[デイトナ]:GIVI 「3D604 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-91051】DAYTONA[デイトナ]:GIVI 「XS306 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79080】DAYTONA[デイトナ]:GIVI 「XS308 タンクロック」+「イージーロック アタッチメント」/Honda Crosstourer 1200(14) 【92600-79082】DAYTONA[デイトナ]:GIVI イージーロック タンクバック取付アタッチメント(BF20)/Honda Crosstourer 1200(14) 【92600】DAYTONA[デイトナ]:GIVI XS307 タンクロック XSTREAM 【79081】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO「and-S」パニアシステム 31+31L Honda CBF1000(シルバーフレーム)

価格177904円

●メーカー品番:01-618-0051-0●適合車種:HONDA・CBF1000/F●備考:The aluminium pannier system again has a very robust construction.We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle.Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case.The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 91 cm- Stainless steel rackPannier system Robust stainless steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall.Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega Pro In a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof,and manufactured to the highest standards- no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!).You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall.The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design- the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid.The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories.The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro And-S 31 litres, with pre-fitted 18 mm fixing kit 1 pannier rack including mounting hardware●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

【430】デイトナ GIVI BF03 イージーロック/ホンダ/75026

価格1646円

■商品名GIVI BF03 イージーロック■品番75026■適合等【ホンダ】・CB600F Hornet / Hornet ABS('07〜'10)・CBF600S/CBF600N('04〜'12)・CBR600RR('05〜'06)・CBR600RR('07〜'09) ・CBR600F('11〜'12)・Hornet600('11〜'12)・NT700Deauville('06〜'12)・XL700VTransalp('08〜'12)・VFR800VTEC('02〜'11)・CBR1000RR('08〜'12)・CB1000R('08〜'12)・CBF1000/CBF1000ST('10〜'12)・CBF1000('06〜'09)・VFR1200F('10〜'12)・Honda Crosstourer1200('12)・CB1300SF('03〜'10)・CB400SF('04〜'11)※詳しくは下記適合表をご確認下さい。※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際に、タンクバッグとハンドルが接触する場合があります。※適合表中「実車確認済」欄が●印の車種は、デイトナで取り付けを確認しています。※適合表中「実車確認済」欄に●印がない車種は、デイトナで取り付けの確認は行なっておりませんが、GIVI社で適合を公表している車種となります。取付可能ですが、タンクバッグは汎用品のためセーフティベルトが届かなかったりタンクバッグ装着の際に固く感じる場合があります。セーフティベルトの長さが足りない場合は、別売品のセーフティベルトと併用し取り付けをしてください。※構造上、タンクバッグの高さが磁石式のもの等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。■備考※詳しくはメーカーサイト・カタログをご確認の上お申し込み下さい。※デザイン・仕様等改善のため予告なく変更される場合がございます。※お取り寄せ商品。【ご注文の際の注意事項】※必ず以下の事項をご了承の上お申し込みください。◆お取り寄せ品につき、キャンセル・返品・交換は承り出来ません。◆品切・完売の場合がございますので、受注後に発送予定をご連絡させて頂きます。◆画像はイメージとなりますので、商品とは色・デザインが異なる場合があります。◆イージーロック適合表◆デイトナ

詳細を確認する

【430】デイトナ GIVI BF03 イージーロック/ホンダ/75026

価格1646円

■商品名GIVI BF03 イージーロック■品番75026■適合等【ホンダ】・CB600F Hornet / Hornet ABS('07〜'10)・CBF600S/CBF600N('04〜'12)・CBR600RR('05〜'06)・CBR600RR('07〜'09) ・CBR600F('11〜'12)・Hornet600('11〜'12)・NT700Deauville('06〜'12)・XL700VTransalp('08〜'12)・VFR800VTEC('02〜'11)・CBR1000RR('08〜'12)・CB1000R('08〜'12)・CBF1000/CBF1000ST('10〜'12)・CBF1000('06〜'09)・VFR1200F('10〜'12)・Honda Crosstourer1200('12)・CB1300SF('03〜'10)・CB400SF('04〜'11)※詳しくは下記適合表をご確認下さい。※車種によっては、タンクキャップが全開しない場合がありますが、使用上問題なく給油することができます。※車種によっては、ハンドル操作した際に、タンクバッグとハンドルが接触する場合があります。※適合表中「実車確認済」欄が●印の車種は、デイトナで取り付けを確認しています。※適合表中「実車確認済」欄に●印がない車種は、デイトナで取り付けの確認は行なっておりませんが、GIVI社で適合を公表している車種となります。取付可能ですが、タンクバッグは汎用品のためセーフティベルトが届かなかったりタンクバッグ装着の際に固く感じる場合があります。セーフティベルトの長さが足りない場合は、別売品のセーフティベルトと併用し取り付けをしてください。※構造上、タンクバッグの高さが磁石式のもの等に比べ高くなります。体格によっては、タンクバッグと体が当たり、ハンドルまでの距離が遠く感じる場合があります。■備考※詳しくはメーカーサイト・カタログをご確認の上お申し込み下さい。※デザイン・仕様等改善のため予告なく変更される場合がございます。※お取り寄せ商品。【ご注文の際の注意事項】※必ず以下の事項をご了承の上お申し込みください。◆お取り寄せ品につき、キャンセル・返品・交換は承り出来ません。◆品切・完売の場合がございますので、受注後に発送予定をご連絡させて頂きます。◆画像はイメージとなりますので、商品とは色・デザインが異なる場合があります。◆イージーロック適合表◆デイトナ

詳細を確認する

TOURATECH ツラーテックZEGA Pro2 アルミパニアシステム【アルマイトシルバー】 38L+38L HONDA VFR1200X Crosstourer (シルバーフレーム)

価格181347円

●メーカー品番:01-406-6011-0●カラー:アルマイトシルバー●適合車種:HONDA VFR1200X Crosstourer●備考:HONDA VFR1200X Crosstourerに適合のパニアケースセット。 商品内容: ・ZEGA Pro2 アルミパニアケース【アルマイトシルバー】 ×2 (38L+38L) ・車種別専用パニアラック【シルバー】 ×1 ・リリースキャッチ用キーシリンダー ×2 ※リッド用キーシリンダー(インテグラルロック)は別売りです。The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2.Based on the Zega Pro, its excellent properties have all been retained,but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism.The lid can stay closed when it is removed from the bike. Pannier on, click - and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning Zega Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 87 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:2 x aluminium pannier Zega Pro2 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA Pro2 アルミパニアシステム【アルマイトシルバー】 31L+31L HONDA VFR1200X Crosstourer (シルバーフレーム)

価格181347円

●メーカー品番:01-406-6001-0●カラー:アルマイトシルバー●適合車種:HONDA VFR1200X Crosstourer●備考:HONDA VFR1200X Crosstourerに適合のパニアケースセット。 商品内容: ・ZEGA Pro2 アルミパニアケース【アルマイトシルバー】 ×2 (31L+31L) ・車種別専用パニアラック【シルバー】 ×1 ・リリースキャッチ用キーシリンダー ×2 ※リッド用キーシリンダー(インテグラルロック)は別売りです。The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2.Based on the Zega Pro, its excellent properties have all been retained,but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism.The lid can stay closed when it is removed from the bike. Pannier on, click - and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning Zega Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 87 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:2 x aluminium pannier Zega Pro2 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

【セール特価!】【HONDA】【ホンダ】【トップケース・テールボックス】【トップボックスインナーバッグ 35L用】【NC750X RC72】【NC750S RC70】【INTEGRA [インテグラ] RC71】【CBR400R NC47】【CB400F NC47】【400X NC47】

価格8164円

■商品番号08L09MGSD30<対応アクセサリー>※車種をご確認ください。■適合車種▼HONDANC750X RC72 NC750S RC70 INTEGRA [インテグラ] RC71 CBR400R NC47 CB400F NC47 400X NC47 ■詳細説明◇トップボックスの形状に合わせたバッグです。◇トップボックスに収納する荷物の持ち運びに大変便利です。■注意点※貴重品等を入れたままにしないでください。

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 パニアシステム 31+31L HONDA CBF1000/F 【組付必要】 「STREETLINE」

価格182553円

●メーカー品番:01-618-0045-0●適合車種:HONDA CBF1000/F●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 91 cm- Stainless steel rackPannier systemRobust stainless steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega ProIn a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 『And-Black』 31 litres, with pre-fitted 18 mm fixing kit1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA Pro2 アルミパニアシステム【アルミ無塗装】 31L+31L HONDA VFR1200X Crosstourer (シルバーフレーム)

価格165762円

●メーカー品番:01-406-6000-0●カラー:アルミ無塗装●適合車種:HONDA VFR1200X Crosstourer●備考:HONDA VFR1200X Crosstourerに適合のパニアケースセット。 商品内容: ・ZEGA Pro2 アルミパニアケース【アルミ無塗装】 ×2 (31L+31L) ・車種別専用パニアラック【シルバー】 ×1 ・リリースキャッチ用キーシリンダー ×2 ※リッド用キーシリンダー(インテグラルロック)は別売りです。The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2.Based on the Zega Pro, its excellent properties have all been retained,but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism.The lid can stay closed when it is removed from the bike. Pannier on, click - and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning Zega Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 87 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:2 x aluminium pannier Zega Pro2 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA Pro2 アルミパニアシステム【アルマイトブラック】 31L+31L HONDA VFR1200X Crosstourer (シルバーフレーム)

価格187546円

●メーカー品番:01-406-6002-0●カラー:アルマイトブラック●適合車種:HONDA VFR1200X Crosstourer●備考:HONDA VFR1200X Crosstourerに適合のパニアケースセット。 商品内容: ・ZEGA Pro2 アルミパニアケース【アルマイトブラック】 ×2 (31L+31L) ・車種別専用パニアラック【シルバー】 ×1 ・リリースキャッチ用キーシリンダー ×2 ※リッド用キーシリンダー(インテグラルロック)は別売りです。The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2.Based on the Zega Pro, its excellent properties have all been retained,but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism.The lid can stay closed when it is removed from the bike. Pannier on, click - and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning Zega Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 87 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:2 x aluminium pannier Zega Pro2 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

TOURATECH ツラーテックZEGA-PRO 「And-black」 パニアシステム 31+31L HONDA CBF1000/F 【組付必要】 「STREETLINE」

価格182553円

●メーカー品番:01-618-0045-0●適合車種:HONDA CBF1000/F●備考:■ブラックアルマイト仕様につきまして■ ブラックアルマイト仕様につきましては、国際輸送時の振動等により表面のブラックアルマイト部分に微細キズが付いてしまう恐れがあります。実用上は全く問題ありませんがこれらの外観上の問題については免責(保証対象外)とさせて頂きますので予めご了承下さい。The aluminium pannier system again has a very robust construction. We have tried to bring the pannier racks and the panniers as close as possible to the motorcycle. Numerous tests have already been performed in order to ensure that the entire development satisfies the required demands.The rack is made of 18 mm steel tubing and is attached to existing mounting points using special fixing clips and reinforcing pieces.The anodised version of the ZEGA Pro doesn’t just shine in its fabulous black look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.- ready fitted fixing kits- sturdy connecting bar- original indicators can be re-used- overall width: 91 cm- Stainless steel rackPannier systemRobust stainless steel pannier frame made from 18mm diameter steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Zega ProIn a modern design and state-of-the-art construction, our developers have come up with a veritable masterpiece in the ZEGA Pro.Light and yet sturdy, the case is available in a 31/31 litre version, made entirely of 1.5-mm aluminium, water- and dust-proof, and manufactured to the highest standards - no way were we going to settle for a basic plastic construction that was simply jazzed up with a few bits of moulded aluminium!The lid and base of the ZEGA Pro are welded, which achieves the maximum rigidity of the connections, and the base and outer shell have high quality rivets (no cheap studs for us - or you!). You’ll find no leaky welded seams along the edges. High quality silicone seals ensure that the contents of this case are protected as well as possible.The highly robust protective strip along the car case is screwed on, and so is easily replaced when necessary - perhaps after a fall. The same applies to the strong protective corners on the lid, which comes off completely or can be opened just from one side - the catches double as hinges.The ZEGA Pro appeals not only for its technology and workmanship, but also for the many clever detail solutions and the modern protected design - the rounded lines of the item really do catch the eye. Thus, for instance, a clever handle can be added to the lid. The four attachment eyes rise only slightly above the surface of the case, so it also makes an ideal seat.Some of the other benefits of the ZEGA Pro are that it is easy to open to retrieve a luggage roll and our extensive range of accessories. The clever touches of the ZEGA Pro include the ingenious lock system, which is strong and reliable yet easy to operate.The advantages at a glance:- automatic locking prevents the catches from opening accidentally- fitted locks can be replaced or added later without drilling or filing- simultaneously locking fitted locks are available at no extra charge; also available with simultaneous locking with navigation brackets and oil plugs.Delivery schedule of the system:2 aluminium pannier Zega Pro 『And-Black』 31 litres, with pre-fitted 18 mm fixing kit1 pannier rack including mounting hardware※カギなどのオプションパーツは別売りです。●写真注意:※画像はイメージです。●納期:メーカー取寄せ商品のため完売の際は納期にお時間頂きます。また、販売終了の場合もございますので予めご了承下さい。【smtb-F】

詳細を確認する

【セール特価!】【HONDA】【ホンダ】【トップケース・テールボックス】【トップボックスインナーバッグ 35L用】【NC750X RC72】【NC750S RC70】【INTEGRA [インテグラ] RC71】【CBR400R NC47】【CB400F NC47】【400X NC47】

価格8164円

■商品番号08L09MGSD30<対応アクセサリー>※車種をご確認ください。■適合車種▼HONDANC750X RC72 NC750S RC70 INTEGRA [インテグラ] RC71 CBR400R NC47 CB400F NC47 400X NC47 ■詳細説明◇トップボックスの形状に合わせたバッグです。◇トップボックスに収納する荷物の持ち運びに大変便利です。■注意点※貴重品等を入れたままにしないでください。

詳細を確認する

TOURATECH ツラーテックZEGA Pro2 アルミパニアシステム【アルミ無塗装】 38L+38L HONDA VFR1200X Crosstourer (シルバーフレーム)

価格165762円

●メーカー品番:01-406-6010-0●カラー:アルミ無塗装●適合車種:HONDA VFR1200X Crosstourer●備考:HONDA VFR1200X Crosstourerに適合のパニアケースセット。 商品内容: ・ZEGA Pro2 アルミパニアケース【アルミ無塗装】 ×2 (38L+38L) ・車種別専用パニアラック【シルバー】 ×1 ・リリースキャッチ用キーシリンダー ×2 ※リッド用キーシリンダー(インテグラルロック)は別売りです。The next step in evolution After Zega and Zega Pro, we have now developed the Zega Pro2.Based on the Zega Pro, its excellent properties have all been retained,but many details have also been significantly improved.The Zega Pro2 shines with its improved profile for even better operation, a carrying handle as standard and optimised ventilation.Above all, though, the pre-assembled version is an absolute revolution!It is factory-fitted with an entirely new attachment system that combines suitability with maximum ease of use,facilitating single-handed use - you could say it’s 「Plug and play」 for fully packed aluminium panniers!There’s a single lever on the outside to operate the mechanism.The lid can stay closed when it is removed from the bike. Pannier on, click - and go!The innovative construction in resilient stainless steel releases the catch before attachment,which means the Zega Pro2 can also cope with extreme loads.The supports for the Zega Pro2 accessories holder are also standard fittings on the pre-assembled Zega Pro2 on both sides of each pannier.They are automatically locked when the lid is closed.Panniers:- improved seal profile for precise and even easier use - carrying handle made of strong harness material as standard, lowered into the handle groove on the pannier lid so no irritation either when sitting or when securing luggage - optimised ventilation system for easy opening at high pressure differences, e.g. after going through a tunnel - including all the benefits of the award-winning Zega Pro aluminium pannier - also available in a lockable version so it can be secured with other Touratech locks Available in 3 sizes (31, 38, 45 litres) and 3 finishes (natural aluminium, anodised silver 「AND-S」 and anodised black 「AND-black」 The anodised version of the ZEGA Pro2 doesn’t just shine in its fabulous natural aluminium look, but also prevents rubbing inside the case. The ultra thick, high quality anodised layer offers very special protection for the surface and helps to prevent discoloration.Mounting:- Genuine single-handed use thanks to the pre-assembled mounting system that is fully operated from the outside - conveniently positioned release catches, in a protected position between the pannier and seat - including pre-assembled supports for all Zega Pro2 accessory holders on both sides of a pannier.The very strong construction in stainless steel and fibreglass-reinforced plastic elements provides absolute stability and reliability even under the toughest conditions. The new fixation system further reinforces the overall pannier system.Zega Pro2 panniers will fit on almost any Touratech pannier racks. Their special construction offers the option for balancing out any tolerances.Pannier frame - Stainless steel rack - sturdy connecting bar - overall width: 87 cm Robust steel pannier frame made from 18mm diameter stainless steel tube with a 2mm thick wall. Bolted crosspiece for better rigidity. Mounting easy to fit. Uses standard mounting points. No modifications to rear footrests. Mounting bolts are included.Delivery schedule of the system:2 x aluminium pannier Zega Pro2 31 litres 1 x pannier rack including mounting hardware 1 x Integral locks set for Zega Pro2 release catches with 2 simultaneous locking (01-050-3300-0)●写真注意:※画像はイメージです。●納期:※メーカー取寄せ商品のため納期にお時間頂きます。なお、完売の際はご了承下さい。【smtb-F】

詳細を確認する

【HONDA】【ホンダ】【バックレスト・グラブバー】【バックレスト:トールパッドタイプ】【VT750S RC58】【SHADOW750 [シャドウ] RC50】【SHADOW750 [シャドウ] RC56 ABS仕様】【VT400S NC46】【SHADOW400 [シャドウ] クラシック】【SHADOW400 [シャドウ] カスタム NC45】

価格10249円

■商品番号08F75MEG000A■商品概要パッドサイズ:235(縦)×150(横)×55(厚さ)mmパッドカラー:ブラックバックレストバーカラー:シルバー(クロムメッキ仕上げ)※メーカー純正オプションの為、<別途必要取付パーツ>■適合車種▼HONDAVT750S RC58 SHADOW750 [シャドウ] RC50 SHADOW750 [シャドウ] RC56 ABS仕様 VT400S NC46 SHADOW400 [シャドウ] クラシック SHADOW400 [シャドウ] カスタム NC45 ■詳細説明◇アメリカンカスタムにおけるタンデムライディングの必須アイテム。◇パッセンジャーの乗り心地を追求しながら、標準装備のようにVT750Sのイメージを意識。◇リアキャリアとの同時装着も可能で、積載性にも配慮しています。■注意点※取り付けにはが必要です。※適用車種をご確認ください。

詳細を確認する

【HONDA】【ホンダ】【バックレスト・グラブバー】【バックレスト:トールパッドタイプ】【VT750S RC58】【SHADOW750 [シャドウ] RC50】【SHADOW750 [シャドウ] RC56 ABS仕様】【VT400S NC46】【SHADOW400 [シャドウ] クラシック】【SHADOW400 [シャドウ] カスタム NC45】

価格10249円

■商品番号08F75MEG000A■商品概要パッドサイズ:235(縦)×150(横)×55(厚さ)mmパッドカラー:ブラックバックレストバーカラー:シルバー(クロムメッキ仕上げ)※メーカー純正オプションの為、<別途必要取付パーツ>■適合車種▼HONDAVT750S RC58 SHADOW750 [シャドウ] RC50 SHADOW750 [シャドウ] RC56 ABS仕様 VT400S NC46 SHADOW400 [シャドウ] クラシック SHADOW400 [シャドウ] カスタム NC45 ■詳細説明◇アメリカンカスタムにおけるタンデムライディングの必須アイテム。◇パッセンジャーの乗り心地を追求しながら、標準装備のようにVT750Sのイメージを意識。◇リアキャリアとの同時装着も可能で、積載性にも配慮しています。■注意点※取り付けにはが必要です。※適用車種をご確認ください。

詳細を確認する

ページ:TOP / 1 /2 /3 /4 /5 /6 /7 /8 /9 /10 /11 /12 /13 /14 /15 /16 /17 /18 /19 /20 /21 /22 /23 /